My Quote Request
No products added yet
6520-00-926-8845
20 Products
9268845
MANDREL,DENTAL HANDPIECE
NSN, MFG P/N
6520009268845
NSN
6520-00-926-8845
MFG
SUISSE-O-MATIC MANUFACTURING CORP
Description
DESIGN TYPE: SCREW
HANDPIECE TYPE FOR WHICH DESIGNED: ANGLE
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: MANDREL DENTAL HANDPIECE ANGLE HANDPIECE SCREW TYPE 6S
MATERIAL: STEEL, CORROSION RESISTING
NONDEFINITIVE SPEC/STD DATA: AL CLASS
OVERALL LENGTH: 0.718 INCHES MINIMUM AND 0.843 INCHES MAXIMUM
SHANK DIAMETER: 0.0919 INCHES MINIMUM AND 0.0929 INCHES MAXIMUM
SPECIAL FEATURES: FOR USE W/SCREW-IN TYPE ABRASIVE DISKS AND ABRASIVE WHEELS
Related Searches:
9055106
POINT,ENDODONTIC
NSN, MFG P/N
6520009041981
NSN
6520-00-904-1981
MFG
PREMIER DENTAL PRODUCTS CO
Description
COLOR: WHITE
DIAMETER: 0.055 INCHES
III PART NAME ASSIGNED BY CONTROLLING AGENCY: POINT ENDODONTIC PAPER EXTRA COARSE STERILE 40 CELLS 6 SIZE 200S
MATERIAL: PAPER
NONDEFINITIVE SPEC/STD DATA: 6 SIZE
OVERALL LENGTH: 1.125 INCHES NOMINAL
QUANTITY: 200
SHAPE: TAPERED
SPECIAL FEATURES: EXTRA COARSE; STERILE; 40 CELLS; EACH CELL CONTAINS FIVE POINTS,AND CAN BE OPENED SEPARATELY
X-RAY OPACITY: NOT INCLUDED
Related Searches:
FX1
CHAIR,DENTAL OPERATING
NSN, MFG P/N
6520009041985
NSN
6520-00-904-1985
MFG
SYBRON CORP
Description
COLOR: BLUE OR GREEN OR TAN OR WHITE OR CORAL
DESIGN TYPE: MOTOR DRIVEN PEDESTAL
MAJOR COMPONENTS: ARMRESTS,REMOVABLE; BACKREST; FOOTREST,REMOVABLE; HEADREST,ADJUSTABLE; HYDRAULIC LIFT ASSEMBLY
MOTOR CURRENT TYPE: AC
MOTOR FREQUENCY RATING: 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
MOTOR PHASE: SINGLE
MOTOR VOLTAGE IN VOLTS: 120.0
SURFACE TREATMENT: ENAMEL
UPHOLSTERED COMPONENT NAME: ARMS; BACK; FOOTREST; HEADREST; SEAT
UPHOLSTERY COLOR: BLACK OR BLUE OR GREEN OR TAN OR WHITE
UPHOLSTERY MATERIAL: VINYL
Related Searches:
LF II
LIGHT,DENTAL OPERATING UNIT
NSN, MFG P/N
6520009057894
NSN
6520-00-905-7894
MFG
PELTON AND CRANE CO
Description
FEATURES PROVIDED: TRANSFORMER
FURNISHED ITEMS AND QUANTITY: 1 LAMP
III PART NAME ASSIGNED BY CONTROLLING AGENCY: LIGHT DENTAL OPERATING UNIT REFLECTOR TYPE 115V 60HZ AC
LAMP BASE TYPE ACCOMMODATED: RECESSED SINGLE CONTACT
LAMP TYPE ACCOMMODATED AND QUANTITY: 1 INCANDESCENT
LIGHT ADJUSTMENT LIMITS: 240.0 INCHES NOMINAL HORIZONTAL 280.0 INCHES NOMINAL VERTICAL
LIGHT ADJUSTMENT METHOD: FLOATING ARM AND SWIVEL JOINT AND YOKE
MATERIAL: ALUMINUM BODY ALUMINUM REFLECTOR
MOUNTING METHOD: SUPPORT ROD
OVERALL HEIGHT: 9.000 INCHES NOMINAL
OVERALL LENGTH: 52.000 INCHES NOMINAL
OVERALL WIDTH: 7.000 INCHES NOMINAL
REFLECTOR INCLOSURE TYPE: INCLOSED SINGULAR
REFLECTOR SHAPE: CONCAVE
SPECIAL FEATURES: REFLECTOR TYPE; 115 VOLT, 60 HZ, AC OR 230 VOLT, 50 HZ, AC; 200 WATTS; REQUISITIONER MUST SPECIFY VOLTAGE AND FREQ REQUIRED; WALL MTD; SMOKEY WHITE LAMP; 3-POSITION SWITCH; IF LIGHT IS TO BE MTD ON A DENTAL CHAIR OR DENTAL OPER UNIT, INSTEAD OF ON WALL,
SURFACE TREATMENT: ENAMEL BODY
TERMINAL TYPE AND QUANTITY: 1 CONNECTOR, PLUG, EXTERNAL, FLAT BLADE, 3 WIRE
WIRING PROVISION LENGTH: ANY ACCEPTABLE SINGLE PROVISION
WIRING PROVISION METHOD: CABLE ASSEMBLY
~1: REQUISITIONER SHOULD ORDER MOUNTING BRKT AND POST FOR ATTACHING LIGHT FROM THE CHAIR OR OPER UNIT MANUFACTURER; FOR REPLACEMENT LAMP, ORDER 6520-00-176-5083
Related Searches:
6520
LENS
NSN, MFG P/N
6520009060947
NSN
6520-00-906-0947
MFG
JOHNS-MANVILLE CORP JOHNS-MANVILLE SALES HOLOPHANE DIV
Description
LENS
Related Searches:
61513
HOSE ASSEMBLY,DENTA
NSN, MFG P/N
6520009153081
NSN
6520-00-915-3081
MFG
DENTSPLY INTERNATIONAL INC. DBA TRUBYTE DIV DENTSPLY PROSTHETICS DIVISION AKA TRUBYTE
Description
DESIGN CONTROL REFERENCE: 61513
GENERAL CHARACTERISTICS ITEM DESCRIPTION: RUBBER,0.125 IN. NOM ID,0.250 IN. NOM OD,10 FT LG,BOTH ENDS IDENTICAL COMPLETE WITH FITTINGS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: HOSE ASSEMBLY DENTAL ULTRASONIC PROPHYLAXIS UNIT
III UNIT OF ISSUE CUBE: 0.020 CUBIC FEET
MANUFACTURERS CODE: 16969
THE MANUFACTURERS DATA:
Related Searches:
00604
PULP PROTECTOR,DENTAL
NSN, MFG P/N
6520009173700
NSN
6520-00-917-3700
MFG
KERR CORPORATION DBA KERR DENTAL MATERIAL CENTER
Description
DESIGN CONTROL REFERENCE: 00604
FURNISHED ITEMS AND QUANTITY: PAD MIXING 1
MANUFACTURERS CODE: 33339
THE MANUFACTURERS DATA:
Related Searches:
KERRCAVITEC
PULP PROTECTOR,DENTAL
NSN, MFG P/N
6520009173700
NSN
6520-00-917-3700
MFG
KERR CORPORATION DBA KERR DENTAL MATERIAL CENTER
Description
DESIGN CONTROL REFERENCE: 00604
FURNISHED ITEMS AND QUANTITY: PAD MIXING 1
MANUFACTURERS CODE: 33339
THE MANUFACTURERS DATA:
Related Searches:
5602-UT
TEETH CLEANING DEVI
NSN, MFG P/N
6520009181449
NSN
6520-00-918-1449
MFG
HALBRAND INC
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: DISPOSABLE; 3/4 INCH LONG HEAD,LATERAL CUTS TO DEPTH OF APPROX. 5/32 INCH,3/4 INCH DIAMETER OF 7 POINTS; IMPREGNATED W/NONFOAMING DENTIFRICE; PLASTIC HANDLE 3-1/2 INCHES LONG; PINK; BULK PACKED,1000 PER CASE
Related Searches:
TOOTHETTE
TEETH CLEANING DEVI
NSN, MFG P/N
6520009181449
NSN
6520-00-918-1449
MFG
HALBRAND INC
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: DISPOSABLE; 3/4 INCH LONG HEAD,LATERAL CUTS TO DEPTH OF APPROX. 5/32 INCH,3/4 INCH DIAMETER OF 7 POINTS; IMPREGNATED W/NONFOAMING DENTIFRICE; PLASTIC HANDLE 3-1/2 INCHES LONG; PINK; BULK PACKED,1000 PER CASE
Related Searches:
10883
HEAD,DENTAL HANDPIECE
NSN, MFG P/N
6520009261457
NSN
6520-00-926-1457
MFG
KERR CORPORATION DBA KERR DENTAL MATERIAL CENTER
Description
FURNISHED ITEMS AND QUANTITY: WRENCH,SHAFT 1
HANDPIECE DESIGN: RIGHT ANGLE
HEAD ADJUSTABILITY: NONADJUSTABLE
HEAD MATERIAL: BRASS
HEAD SURFACE TREATMENT: NICKEL-CHROME
HEAD TYPE: LATCH
III PART NAME ASSIGNED BY CONTROLLING AGENCY: HEAD DENTAL HANDPIECE LATCH TYPE RIGHT ANGLE
SHANK DIAMETER ACCOMMODATED: 0.0917 INCHES MINIMUM AND 0.0929 INCHES MAXIMUM
SPECIAL FEATURES: ACCOMMODATES STANDARD LATCH TYPE BURS AND ABRASIVE WHEELS; FOR USE W/CONTRA-ANGLE HANDPIECE,6520-00-926-1467
Related Searches:
68D
HEAD,DENTAL HANDPIECE
NSN, MFG P/N
6520009261457
NSN
6520-00-926-1457
MFG
KERR CORPORATION DBA KERR DENTAL MATERIAL CENTER
Description
FURNISHED ITEMS AND QUANTITY: WRENCH,SHAFT 1
HANDPIECE DESIGN: RIGHT ANGLE
HEAD ADJUSTABILITY: NONADJUSTABLE
HEAD MATERIAL: BRASS
HEAD SURFACE TREATMENT: NICKEL-CHROME
HEAD TYPE: LATCH
III PART NAME ASSIGNED BY CONTROLLING AGENCY: HEAD DENTAL HANDPIECE LATCH TYPE RIGHT ANGLE
SHANK DIAMETER ACCOMMODATED: 0.0917 INCHES MINIMUM AND 0.0929 INCHES MAXIMUM
SPECIAL FEATURES: ACCOMMODATES STANDARD LATCH TYPE BURS AND ABRASIVE WHEELS; FOR USE W/CONTRA-ANGLE HANDPIECE,6520-00-926-1467
Related Searches:
01823
MOTOR,DENTAL HANDPIECE
NSN, MFG P/N
6520009261479
NSN
6520-00-926-1479
MFG
KERR CORPORATION DBA KERR DENTAL MATERIAL CENTER
Description
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS: 24.000 LINE TO LINE SINGLE INPUT
COOLING METHOD: NONVENTILATED
CURRENT RATING IN AMPS: 4.000 SINGLE INPUT
CURRENT TYPE: DC INPUT
III PART NAME ASSIGNED BY CONTROLLING AGENCY: MOTOR DENTAL HANDPIECE LOW SPEED HIGH TORQUE 24 VOLT DC
MOUNTING METHOD: FACE
OVERALL HEIGHT: 1.062 INCHES
OVERALL LENGTH: 3.500 INCHES
OVERALL WIDTH: 1.062 INCHES
ROTOR SPEED RATING IN RPM: 2000.0 SINGLE FULL LOAD
SPECIAL FEATURES: LOW SPEED; HIGH TORQUE,75 WATTS W/QUICK CHANGE LATCH FOR ATTACHMENT OF CONTRA-ANGLE HANDPIECE,6520-00-926-1467,AND STRAIGHT HANDPIECE,6520-01-061-6452,USED W/CONTROLLER,6110-00-926-0781,FOR CUTTING AND POLISHING PROCEDURES
TERMINAL TYPE AND QUANTITY: 1 CONNECTOR, PLUG
Related Searches:
LS
MOTOR,DENTAL HANDPIECE
NSN, MFG P/N
6520009261479
NSN
6520-00-926-1479
MFG
KERR CORPORATION DBA KERR DENTAL MATERIAL CENTER
Description
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS: 24.000 LINE TO LINE SINGLE INPUT
COOLING METHOD: NONVENTILATED
CURRENT RATING IN AMPS: 4.000 SINGLE INPUT
CURRENT TYPE: DC INPUT
III PART NAME ASSIGNED BY CONTROLLING AGENCY: MOTOR DENTAL HANDPIECE LOW SPEED HIGH TORQUE 24 VOLT DC
MOUNTING METHOD: FACE
OVERALL HEIGHT: 1.062 INCHES
OVERALL LENGTH: 3.500 INCHES
OVERALL WIDTH: 1.062 INCHES
ROTOR SPEED RATING IN RPM: 2000.0 SINGLE FULL LOAD
SPECIAL FEATURES: LOW SPEED; HIGH TORQUE,75 WATTS W/QUICK CHANGE LATCH FOR ATTACHMENT OF CONTRA-ANGLE HANDPIECE,6520-00-926-1467,AND STRAIGHT HANDPIECE,6520-01-061-6452,USED W/CONTROLLER,6110-00-926-0781,FOR CUTTING AND POLISHING PROCEDURES
TERMINAL TYPE AND QUANTITY: 1 CONNECTOR, PLUG
Related Searches:
15627
SPATULA,DENTAL
NSN, MFG P/N
6520009262052
NSN
6520-00-926-2052
MFG
HU-FRIEDY MFG. CO. LLC DBA AMERICAN DENTAL
Description
BLADE LENGTH: 2.000 INCHES MINIMUM AND 2.250 INCHES MAXIMUM
BLADE SHAPE: FLAT
BLADE WIDTH: 0.375 INCHES NOMINAL
GRIP TYPE: SMOOTH
HANDLE TYPE: SOLID
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SPATULA DENTAL PLASTIC FLAT SMOOTH GRIP SZ 142 6.625-6.875"LG
MATERIAL AND LOCATION: PLASTIC OVERALL
OVERALL LENGTH: 6.625 INCHES MINIMUM AND 6.875 INCHES MAXIMUM
SIZE DESIGNATOR: COMMERCIAL SIZE NO. 142
Related Searches:
GGB00821
BUR,DENTAL,EXCAVATING
NSN, MFG P/N
6520009262114
NSN
6520-00-926-2114
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
HANDPIECE TYPE FOR WHICH DESIGNED: STRAIGHT
HEAD SHAPE: SPHERICAL
HEAD SIZE DESIGNATION: 1/2
MANUFACTURERS CODE: 81348
MATERIAL AND LOCATION: TUNGSTEN CARBIDE HEAD STEEL,CARBON OR STEEL,ALLOY SHANK
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: GGB00821
NONDEFINITIVE SPEC/STD DATA: S CLASS AND A SHAPE AND 0.500 SIZE
SPEC/STD CONTROLLING DATA:
Related Searches:
GGB00821
BUR,DENTAL,EXCAVATING
NSN, MFG P/N
6520009262115
NSN
6520-00-926-2115
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
HANDPIECE TYPE FOR WHICH DESIGNED: STRAIGHT
HEAD SHAPE: INVERTED CONE
HEAD SIZE DESIGNATION: 33.500
MANUFACTURERS CODE: 81348
MATERIAL AND LOCATION: TUNGSTEN CARBIDE HEAD STEEL,CARBON OR STEEL,ALLOY SHANK
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: GGB00821
NONDEFINITIVE SPEC/STD DATA: S CLASS AND B SHAPE AND 33.500 SIZE
SPEC/STD CONTROLLING DATA:
Related Searches:
GGB00821
BUR,DENTAL,EXCAVATING
NSN, MFG P/N
6520009262116
NSN
6520-00-926-2116
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
END SHAPE: SQUARE
HANDPIECE TYPE FOR WHICH DESIGNED: STRAIGHT
HEAD SHAPE: STRAIGHT FISSURE
HEAD SIZE DESIGNATION: 557
MANUFACTURERS CODE: 81348
MATERIAL AND LOCATION: TUNGSTEN CARBIDE HEAD STEEL,CARBON OR STEEL,ALLOY SHANK
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: GGB00821
NONDEFINITIVE SPEC/STD DATA: S CLASS AND F SHAPE AND 557 SIZE
SPEC/STD CONTROLLING DATA:
Related Searches:
MILH36498
HOLDER,DENTAL WASTE CUP
NSN, MFG P/N
6520009262167
NSN
6520-00-926-2167
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
MATERIAL: STEEL, CORROSION RESISTING
NONDEFINITIVE SPEC/STD DATA: 2 CLASS
OVERALL HEIGHT: 1.500 INCHES NOMINAL
OVERALL WIDTH: 1.500 INCHES NOMINAL
RECEPTACLE DEPTH: 1.500 INCHES NOMINAL
RECEPTACLE DIAMETER: 0.938 INCHES NOMINAL
RECEPTACLE QUANTITY: 1
UNIT OF ISSUE CUBE: 0.025 CUBIC FEET
UNIT OF ISSUE WEIGHT: 0.69 POUNDS
Related Searches:
48-F
FLASK,DENTURE
NSN, MFG P/N
6520009264770
NSN
6520-00-926-4770
MFG
HANDLER MANUFACTURING COMPANY INC
Description
CONSTRUCTION: SECTIONALIZED
COVER: PROVIDED
EJECTION FEATURE: NOT INCLUDED
HEIGHT: 1.500 INCHES NOMINAL
III PART NAME ASSIGNED BY CONTROLLING AGENCY: FLASK DENTURE BRONZE CROWN & BRIDGE SECTIONALIZED FOUR-PIECE
LOWER SECTION BOTTOM TYPE: OPEN
MATERIAL: BRONZE
SPECIAL FEATURES: CONSTRUCTED OF CAST MANGANESE BRONZE, THIS FOUR PIECE, C & B FLASK IS BUILT FOR THE PERFECTIONIST'S USE IN MAKING PROCESSED, TEMPORARY SPLINTS. HARDER STAINLESS STEEL TAPERED PINS PROVIDE FOR THE PRECISE ALIGNMENT OF THE FOUR SECTIONS. ITS DURABLE
UNIT TYPE: CROWN AND BRIDGE
UPPER SECTION HEIGHT: 1.250 INCHES NOMINAL
UPPER SECTION INSIDE LENGTH: 2.750 INCHES NOMINAL
UPPER SECTION INSIDE WIDTH: 1.625 INCHES NOMINAL
~1: CONSTRUCTION AFFORDS EXCELLENT RESISTANCE TO WARP AGE AND DISTORTION DURING PRESSING PROCESSING OPERATIONS. USE WITH 61A ONE FLASK COMPRESS. INSIDE DIMENSIONS: 2.750 IN. LONG X 1.625 IN. WIDE X 1.250 IN. HIGH (7CM X 4CM X 3CM); SHIPPING WT: 1 LB (0.5 KG);
~2: UNIT DIMENSIONS: 3" L X 2.375" WIDE X 1.500" HIGH (8CM X 6CM X 4CM)
