My Quote Request
No products added yet
5320-01-133-7303
20 Products
AIC-L-758V4-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
CR3242-5-3
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
SPS TECHNOLOGIES LLC DBA CHERRY AEROSPACE DIV
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
CR3242-5-3
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
CR3242-5-3
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
ALCOA FASTENING SYSTEMS FAIRCHILD FA STENERS EUROPE - VSD GMBH
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
CR3242-5-3
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
SATAIR HARDWARE S.A.S.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
HC3242-5-03
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
HR3242-5-03
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS DIV HUCK PRODUCTS DIVISION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
M7885/7-5-03
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
NAS9305BNS-5-03
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
NAS9305BNS-5-03
RIVET,BLIND
NSN, MFG P/N
5320011337300
NSN
5320-01-133-7300
MFG
ALLFAST FASTENING SYSTEMS INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.299 INCHES MINIMUM AND 0.319 INCHES MAXIMUM
GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.290 INCHES MAXIMUM
HEAD STYLE: C9 FLUSH COUNTERSUNK
MATERIAL: ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 8740 STEM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
SHANK DIAMETER: 0.172 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURES: "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE
SURFACE TREATMENT: CHROMATE SLEEVE CADMIUM AND CHROMATE STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM
~1: BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
Related Searches:
NAS1398D6A8
RIVET,BLIND
NSN, MFG P/N
5320011337302
NSN
5320-01-133-7302
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.662 INCHES MAXIMUM
GRIP LENGTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.356 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
HEAT TREATMENT: H-38 STRAIN HARDENED LOCKING RING
MATERIAL: ALUMINUM ALLOY 5056 LOCKING RING
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE LOCKING RING
SHANK DIAMETER: 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIFICATION/STANDARD DATA: 80205-NAS1398 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: ANODIZE OR CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
RV1200-6-8
RIVET,BLIND
NSN, MFG P/N
5320011337302
NSN
5320-01-133-7302
MFG
ALLFAST FASTENING SYSTEMS INC
Description
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.662 INCHES MAXIMUM
GRIP LENGTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.356 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
HEAT TREATMENT: H-38 STRAIN HARDENED LOCKING RING
MATERIAL: ALUMINUM ALLOY 5056 LOCKING RING
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE LOCKING RING
SHANK DIAMETER: 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIFICATION/STANDARD DATA: 80205-NAS1398 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: ANODIZE OR CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
RV1200-6-8
RIVET,BLIND
NSN, MFG P/N
5320011337302
NSN
5320-01-133-7302
MFG
OLYMPIC FASTENING SYSTEMS INC
Description
EXPANSION DEVICE: SERRATED STEM-TYPE W
FASTENER LENGTH: 0.662 INCHES MAXIMUM
GRIP LENGTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.356 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C28 UNIVERSAL
HEAT TREATMENT: H-38 STRAIN HARDENED LOCKING RING
MATERIAL: ALUMINUM ALLOY 5056 LOCKING RING
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE LOCKING RING
SHANK DIAMETER: 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SHANK STYLE: D32 SELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIFICATION/STANDARD DATA: 80205-NAS1398 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: ANODIZE OR CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
Related Searches:
HLT311DL-8-12
PIN-RIVET
NSN, MFG P/N
5320011337303
NSN
5320-01-133-7303
MFG
SPS TECHNOLOGIES LTD TJ BROOKS DIVIS ION
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM
GRIP LENGTH: 0.755 INCHES MAXIMUM
HEAD MAJOR DIAMETER: 0.3948 INCHES MAXIMUM
HEAD STYLE: A12 OVAL COUNTERSUNK
LUBRICATION: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 0.250 INCHES
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLE: B31 PIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH: 95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT: ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TI-SHIELD 3,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
