My Quote Request
No products added yet
5310-00-570-0404
20 Products
707763
WASHER,KEY
NSN, MFG P/N
5310005700404
NSN
5310-00-570-0404
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
DESIGN CONTROL REFERENCE: 707763
DISTANCE FROM CENTERLINE TO END OF KEY: 0.349 INCHES MINIMUM AND 0.369 INCHES MAXIMUM
EXTERNAL STRAIGHT KEY WIDTH: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
MANUFACTURERS CODE: 99167
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5062 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
STYLE DESIGNATOR: 184 KEY
THE MANUFACTURERS DATA:
Related Searches:
55-22283-69
WASHER
NSN, MFG P/N
5310005700416
NSN
5310-00-570-0416
MFG
RAM CENTRIFUGAL PRODUCTS INC.
Description
WASHER
Related Searches:
730A0003
WASHER
NSN, MFG P/N
5310005700416
NSN
5310-00-570-0416
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
WASHER
Related Searches:
730A0003J037A
WASHER
NSN, MFG P/N
5310005700416
NSN
5310-00-570-0416
MFG
WARREN PUMPS LLC
Description
WASHER
Related Searches:
9K69551
WASHER
NSN, MFG P/N
5310005700416
NSN
5310-00-570-0416
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
WASHER
Related Searches:
568-1006-05
WASHER,FLAT
NSN, MFG P/N
5310005700430
NSN
5310-00-570-0430
MFG
L-3 COMMUNICATIONS AVIONICS SYSTEMS INC
Description
CENTER HOLE SHAPE STYLE: 1 ROUND
CROSS-SECTIONAL SHAPE STYLE: 1 RECTANGULAR
DESIGN CONTROL REFERENCE: 568-1006-05
HOLE DIAMETER: 0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM
MANUFACTURERS CODE: 25583
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 COND 3/4 HARD OR HARD MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL DIAMETER: 0.268 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE: 1 ROUND
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THICKNESS: 0.0382 INCHES MINIMUM AND 0.0480 INCHES MAXIMUM
Related Searches:
MS51865-6
NUT,SELF-LOCKING,CAP
NSN, MFG P/N
5310005700476
NSN
5310-00-570-0476
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51865-6
HARDNESS RATING: NOT RATED
III BEARING SURFACE FINISH: 110.0 MICROINCHES
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
LUBRICATION: DRY FILM LUBRICANT
MANUFACTURERS CODE: 96906
MATERIAL: PLASTIC POLYAMIDE LOCKING INSERT STEEL OVERALL EXCEPT INSERT
NOMINAL THREAD SIZE: 0.190 INCHES
NUT HEIGHT: 0.410 INCHES NOMINAL
NUT STYLE: A10 CAP
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL EXCEPT INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
TEMP RATING: 250.0 DEG FAHRENHEIT NOMINAL
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNF
WIDTH ACROSS FLATS: 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
15024459
NUT WHEEL LEFT HAND
NSN, MFG P/N
5310005700492
NSN
5310-00-570-0492
MFG
KLEIN PRODUCTS INC.
Description
NUT WHEEL LEFT HAND
Related Searches:
49416
NUT WHEEL LEFT HAND
NSN, MFG P/N
5310005700492
NSN
5310-00-570-0492
MFG
KLEIN PRODUCTS INC.
Description
NUT WHEEL LEFT HAND
Related Searches:
K1230-35
NUT WHEEL LEFT HAND
NSN, MFG P/N
5310005700492
NSN
5310-00-570-0492
MFG
KLEIN PRODUCTS INC.
Description
NUT WHEEL LEFT HAND
Related Searches:
5110005702757
WASHER,SHOULDERED AND RECESSED
NSN, MFG P/N
5310005702757
NSN
5310-00-570-2757
5110005702757
WASHER,SHOULDERED AND RECESSED
NSN, MFG P/N
5310005702757
NSN
5310-00-570-2757
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
HOLE DIAMETER: 1.181 INCHES MINIMUM AND 1.185 INCHES MAXIMUM
MATERIAL: STEEL COMP 1009 OR STEEL COMP 1015 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 T1,T2,T3 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.060 INCHES NOMINAL
OUTSIDE DIAMETER: 2.188 INCHES NOMINAL
SHOULDER DIAMETER: 1.406 INCHES NOMINAL
SHOULDER HEIGHT: 0.031 INCHES NOMINAL
STYLE DESIGNATOR: 18 SHOULDERED AND RECESSED
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 1,CL 1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
8344708
WASHER,SHOULDERED AND RECESSED
NSN, MFG P/N
5310005702757
NSN
5310-00-570-2757
8344708
WASHER,SHOULDERED AND RECESSED
NSN, MFG P/N
5310005702757
NSN
5310-00-570-2757
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
HOLE DIAMETER: 1.181 INCHES MINIMUM AND 1.185 INCHES MAXIMUM
MATERIAL: STEEL COMP 1009 OR STEEL COMP 1015 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 T1,T2,T3 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.060 INCHES NOMINAL
OUTSIDE DIAMETER: 2.188 INCHES NOMINAL
SHOULDER DIAMETER: 1.406 INCHES NOMINAL
SHOULDER HEIGHT: 0.031 INCHES NOMINAL
STYLE DESIGNATOR: 18 SHOULDERED AND RECESSED
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 1,CL 1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
G22-144
WASHER,SHOULDERED AND RECESSED
NSN, MFG P/N
5310005702757
NSN
5310-00-570-2757
G22-144
WASHER,SHOULDERED AND RECESSED
NSN, MFG P/N
5310005702757
NSN
5310-00-570-2757
MFG
LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
Description
HOLE DIAMETER: 1.181 INCHES MINIMUM AND 1.185 INCHES MAXIMUM
MATERIAL: STEEL COMP 1009 OR STEEL COMP 1015 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 T1,T2,T3 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.060 INCHES NOMINAL
OUTSIDE DIAMETER: 2.188 INCHES NOMINAL
SHOULDER DIAMETER: 1.406 INCHES NOMINAL
SHOULDER HEIGHT: 0.031 INCHES NOMINAL
STYLE DESIGNATOR: 18 SHOULDERED AND RECESSED
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 1,CL 1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
231108
NUT,PLAIN,HEXAGON
NSN, MFG P/N
5310005702758
NSN
5310-00-570-2758
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BEARING SURFACE TYPE: CHAMFERED
DESIGN CONTROL REFERENCE: 231108
DRILLED HOLE DIAMETER: 0.065 INCHES NOMINAL
HARDNESS RATING: 19.0 ROCKWELL C MINIMUM AND 26.0 ROCKWELL C MAXIMUM
HOLE CONFIGURATION STYLE: H1 CONFIGURATION A
HOLE TYPE AND QUANTITY: 2 DRILLED
MANUFACTURERS CODE: 77445
MATERIAL: STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 1.062 INCHES
NUT HEIGHT: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
NUT STYLE: A12 HEXAGON
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 12
THREAD SERIES: UN
WIDTH ACROSS FLATS: 1.364 INCHES MINIMUM AND 1.377 INCHES MAXIMUM
Related Searches:
323461
NUT,PLAIN,HEXAGON
NSN, MFG P/N
5310005702847
NSN
5310-00-570-2847
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BEARING SURFACE TYPE: CHAMFERED
DESIGN CONTROL REFERENCE: 323461
HARDNESS RATING: NOT RATED
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD SIZE: 1.250 INCHES
NUT HEIGHT: 0.438 INCHES NOMINAL
NUT STYLE: A12 HEXAGON
SPECIAL FEATURES: 2 0.067 IN. DIA. WIRE HOLES ON WRENCHING FLATS
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 7
THREAD SERIES: UNC
WIDTH ACROSS FLATS: 1.625 INCHES NOMINAL
Related Searches:
P46390
WASHER,IMPELLER
NSN, MFG P/N
5310005702858
NSN
5310-00-570-2858
MFG
ITT BELL AND GOSSET-HYDRONICS A UNIT OF ITT FLUID HANDLING DIV
Description
WASHER,IMPELLER
Related Searches:
PW531BR
WASHER,IMPELLER
NSN, MFG P/N
5310005702858
NSN
5310-00-570-2858
MFG
ITT BELL AND GOSSET-HYDRONICS A UNIT OF ITT FLUID HANDLING DIV
Description
WASHER,IMPELLER
Related Searches:
54127
WASHER,FINISHING
NSN, MFG P/N
5310005703532
NSN
5310-00-570-3532
MFG
KLEINSCHMIDT INC
Description
HOLE DIAMETER: 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-636,COND 3-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.406 INCHES NOMINAL
OVERALL HEIGHT: 0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
RECESS DIAMETER: 1.000 INCHES NOMINAL
STYLE DESIGNATOR: 27 FINISHING
SURFACE TREATMENT: PHOSPHATE OVERALL
Related Searches:
2752-054
NUT,SELF-LOCKING,BARREL
NSN, MFG P/N
5310005704049
NSN
5310-00-570-4049
MFG
ASC INTERNATIONAL INC DBA ASC INDUSTRIES
Description
BARREL HEIGHT: 0.409 INCHES MINIMUM AND 0.429 INCHES MAXIMUM
COUNTERBORE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM NUT
FEATURES PROVIDED: FLOATING NUT
HARDNESS RATING: 29.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
MATERIAL: PLASTIC POLYAMIDE LOCKING INSERT STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 4340 NUT
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 4TH MATERIAL RESPONSE NUT
NOMINAL THREAD SIZE: 0.312 INCHES
NUT COUNTERBORE DEPTH: 0.103 INCHES MINIMUM AND 0.123 INCHES MAXIMUM NUT
NUT DIAMETER: 0.550 INCHES MINIMUM AND 0.553 INCHES MAXIMUM
NUT HEIGHT: 0.464 INCHES NOMINAL
NUT LENGTH: 0.610 INCHES NOMINAL
NUT STYLE: A40 FLOATING SELF-LOCKING BARREL
SURFACE TREATMENT: CADMIUM OVERALL EXCEPT INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2, CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
TEMP RATING: 250.0 DEG FAHRENHEIT NOMINAL
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES: UNJF
Related Searches:
2752-054
NUT,SELF-LOCKING,BARREL
NSN, MFG P/N
5310005704049
NSN
5310-00-570-4049
MFG
HARVARD INDUSTRIES INC
Description
BARREL HEIGHT: 0.409 INCHES MINIMUM AND 0.429 INCHES MAXIMUM
COUNTERBORE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM NUT
FEATURES PROVIDED: FLOATING NUT
HARDNESS RATING: 29.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
MATERIAL: PLASTIC POLYAMIDE LOCKING INSERT STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 4340 NUT
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 4TH MATERIAL RESPONSE NUT
NOMINAL THREAD SIZE: 0.312 INCHES
NUT COUNTERBORE DEPTH: 0.103 INCHES MINIMUM AND 0.123 INCHES MAXIMUM NUT
NUT DIAMETER: 0.550 INCHES MINIMUM AND 0.553 INCHES MAXIMUM
NUT HEIGHT: 0.464 INCHES NOMINAL
NUT LENGTH: 0.610 INCHES NOMINAL
NUT STYLE: A40 FLOATING SELF-LOCKING BARREL
SURFACE TREATMENT: CADMIUM OVERALL EXCEPT INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2, CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
TEMP RATING: 250.0 DEG FAHRENHEIT NOMINAL
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES: UNJF
