My Quote Request
No products added yet
5306-01-309-8805
20 Products
74328-5H8Y
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098805
NSN
5306-01-309-8805
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.343 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/32 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
Related Searches:
VS3190-3-9
BOLT,SHEAR
NSN, MFG P/N
5306013098545
NSN
5306-01-309-8545
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
FASTENER LENGTH: 0.946 INCHES MINIMUM AND 0.976 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.253 INCHES MINIMUM AND 0.259 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.424 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-3-9
BOLT,SHEAR
NSN, MFG P/N
5306013098545
NSN
5306-01-309-8545
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
FASTENER LENGTH: 0.946 INCHES MINIMUM AND 0.976 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.253 INCHES MINIMUM AND 0.259 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.424 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
122897-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC763-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MB156-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
HI-SHEAR CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
PBF1267-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S343-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
S343-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
HUCK INTL INC
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M753-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
BOEING COMPANY THE DBA BOEING
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M753-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VFK600-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
VALLEY-TODECO INC.
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VS3190-4-11
BOLT,SHEAR
NSN, MFG P/N
5306013098546
NSN
5306-01-309-8546
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER DIAMETER: 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
HEAD HEIGHT: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
74328-5H8X
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098804
NSN
5306-01-309-8804
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.327 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/64 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
Related Searches:
MB86-5H8
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098804
NSN
5306-01-309-8804
MFG
HI-SHEAR CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.327 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/64 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
Related Searches:
AIC473H5-8
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098805
NSN
5306-01-309-8805
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.343 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/32 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
Related Searches:
BM3326-5H8Y
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098805
NSN
5306-01-309-8805
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.343 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/32 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
Related Searches:
BM3326-5H8Y
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098805
NSN
5306-01-309-8805
MFG
HUCK INTL INC
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.343 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/32 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
Related Searches:
MB87-5H8
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306013098805
NSN
5306-01-309-8805
MFG
HI-SHEAR CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.082 INCHES NOMINAL
FASTENER LENGTH: 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
GRIP DIAMETER: 0.343 INCHES NOMINAL
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.348 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F-15 AIRCRAFT PDM
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: 1/32 IN. OVERSIZE (SALVAGE) PART FOR MB84
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.551 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.372 INCHES NOMINAL
