My Quote Request
No products added yet
5306-01-134-0719
20 Products
79894D3-14
BOLT,SHEAR
NSN, MFG P/N
5306011340719
NSN
5306-01-134-0719
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.006 INCHES MINIMUM AND 1.038 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.169 INCHES MINIMUM AND 1.216 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2,CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.284 INCHES MINIMUM AND 0.351 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
S406-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
HUCK INTL INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
SLB748-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
SPACELOK INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
ST3M744-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
BOEING COMPANY THE DBA BOEING
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
ST3M744-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
M.S. AEROSPACE INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
ST3M744-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
HEARTLAND PRECISION FASTENERS INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
ST3M744-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
HOUSTON PRECISION FASTENER L.L.C.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
ST3M744-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
VCG0001-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
VALLEY-TODECO INC.
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
VS3174-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
VS3174-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
VS3174-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
WC744-8D32
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011340199
NSN
5306-01-134-0199
MFG
WEST COAST AEROSPACE INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH: 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
HEAD STYLE: C12 SPLINE DRIVE SHEAR HEAD
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
Related Searches:
SR10699A
ROD
NSN, MFG P/N
5306011340559
NSN
5306-01-134-0559
MFG
SHUR-LOK CORPORATION DIV SPS FASTENER DIVISION
Description
ROD
Related Searches:
68A250308-2001
BOLT,SHOULDER
NSN, MFG P/N
5306011340697
NSN
5306-01-134-0697
MFG
BOEING COMPANY THE DBA BOEING
Description
DESIGN CONTROL REFERENCE: 68A250308-2001
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 3.344 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 3.535 INCHES MINIMUM AND 3.575 INCHES MAXIMUM
HEAD HEIGHT: 0.630 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 76301
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.999 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 2.745 INCHES MINIMUM AND 2.756 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.594 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM
Related Searches:
68A250307-2001
BOLT,SHOULDER
NSN, MFG P/N
5306011340698
NSN
5306-01-134-0698
MFG
BOEING COMPANY THE DBA BOEING
Description
DESIGN CONTROL REFERENCE: 68A250307-2001
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.804 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 3.005 INCHES MINIMUM AND 3.045 INCHES MAXIMUM
HEAD HEIGHT: 0.630 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 76301
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.749 INCHES NOMINAL FIRST SHOULDER
SHOULDER LENGTH: 2.216 INCHES MINIMUM AND 2.226 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.594 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
Related Searches:
AIC558-3D14
BOLT,SHEAR
NSN, MFG P/N
5306011340719
NSN
5306-01-134-0719
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.006 INCHES MINIMUM AND 1.038 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.169 INCHES MINIMUM AND 1.216 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2,CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.284 INCHES MINIMUM AND 0.351 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
BM17035-3-14
BOLT,SHEAR
NSN, MFG P/N
5306011340719
NSN
5306-01-134-0719
MFG
HUCK INTL INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.006 INCHES MINIMUM AND 1.038 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.169 INCHES MINIMUM AND 1.216 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2,CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.284 INCHES MINIMUM AND 0.351 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
BM17035-3-14
BOLT,SHEAR
NSN, MFG P/N
5306011340719
NSN
5306-01-134-0719
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.006 INCHES MINIMUM AND 1.038 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.169 INCHES MINIMUM AND 1.216 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2,CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.284 INCHES MINIMUM AND 0.351 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
GB511EB3D14
BOLT,SHEAR
NSN, MFG P/N
5306011340719
NSN
5306-01-134-0719
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.006 INCHES MINIMUM AND 1.038 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.169 INCHES MINIMUM AND 1.216 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2,CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.284 INCHES MINIMUM AND 0.351 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
