My Quote Request
No products added yet
5306-01-127-3747
20 Products
122897-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
SS5115-4-28
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011272937
NSN
5306-01-127-2937
MFG
SIKORSKY AIRCRAFT CORPORATION
Description
FASTENER LENGTH: 2.195 INCHES MINIMUM AND 2.215 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.750 INCHES MINIMUM AND 1.765 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MANUFACTURERS CODE: 78286
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MFR SOURCE CONTROLLING REFERENCE: SS5115-4-28
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: WITH RETAINING ELEMENT ON SHANK AND TWO HOLES SPACED NINETY DEGREES APART
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.429 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
SS5115-4-28
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306011272937
NSN
5306-01-127-2937
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
FASTENER LENGTH: 2.195 INCHES MINIMUM AND 2.215 INCHES MAXIMUM
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.750 INCHES MINIMUM AND 1.765 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MANUFACTURERS CODE: 78286
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MFR SOURCE CONTROLLING REFERENCE: SS5115-4-28
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: WITH RETAINING ELEMENT ON SHANK AND TWO HOLES SPACED NINETY DEGREES APART
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.429 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
A281493
BOLT
NSN, MFG P/N
5306011273618
NSN
5306-01-127-3618
MFG
YOUNG TOUCHSTONE COMPANY D IV YOUNG TOUCHSTONE
Description
BOLT
Related Searches:
4-141-044-02
BOLT,MACHINE
NSN, MFG P/N
5306011273729
NSN
5306-01-127-3729
MFG
TEXTRON LYCOMING INC WILLIAMSPORT PLANT
Description
DESIGN CONTROL REFERENCE: 4-141-044-02
MANUFACTURERS CODE: 80254
MATERIAL: STEEL CORROSION RESISTING OVERALL
THE MANUFACTURERS DATA:
Related Searches:
4-141-044-02
BOLT,MACHINE
NSN, MFG P/N
5306011273729
NSN
5306-01-127-3729
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
DESIGN CONTROL REFERENCE: 4-141-044-02
MANUFACTURERS CODE: 80254
MATERIAL: STEEL CORROSION RESISTING OVERALL
THE MANUFACTURERS DATA:
Related Searches:
MS9518-24
BOLT,MACHINE
NSN, MFG P/N
5306011273730
NSN
5306-01-127-3730
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9518-24
FASTENER LENGTH: 1.625 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.567 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
MS9518-33
BOLT,MACHINE
NSN, MFG P/N
5306011273731
NSN
5306-01-127-3731
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9518-33
FASTENER LENGTH: 2.625 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 96906
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.630 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
Related Searches:
STD3060-16
BOLT,MACHINE
NSN, MFG P/N
5306011273732
NSN
5306-01-127-3732
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
DESIGN CONTROL REFERENCE: STD3060-16
MANUFACTURERS CODE: 99193
MATERIAL: STEEL CORROSION RESISTING OVERALL
THE MANUFACTURERS DATA:
Related Searches:
MS9556-03
BOLT,MACHINE
NSN, MFG P/N
5306011273733
NSN
5306-01-127-3733
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9556-03
EXTENDED WASHER DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.040 INCHES MINIMUM
FASTENER LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MANUFACTURERS CODE: 96906
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.210 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL
Related Searches:
MS9556-03
BOLT,MACHINE
NSN, MFG P/N
5306011273733
NSN
5306-01-127-3733
MFG
LOCKHEED MARTIN AERONAUTICAL SYSTEMS SUPPORT COMPANY DBA L M A S S C
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9556-03
EXTENDED WASHER DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.040 INCHES MINIMUM
FASTENER LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
MANUFACTURERS CODE: 96906
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 130000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.210 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL
Related Searches:
128854-3
BOLT,INTERNAL WRENCHING
NSN, MFG P/N
5306011273741
NSN
5306-01-127-3741
MFG
LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV
Description
DESIGN CONTROL REFERENCE: 128854-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.070 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.410 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.150 INCHES NOMINAL
HEAD DIAMETER: 0.250 INCHES NOMINAL
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 09205
MATERIAL: STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE FINISH: 16.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.110 INCHES NOMINAL
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNS
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
Related Searches:
4-141-029-02
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306011273744
NSN
5306-01-127-3744
4-141-029-02
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306011273744
NSN
5306-01-127-3744
MFG
TEXTRON LYCOMING INC WILLIAMSPORT PLANT
Description
DESIGN CONTROL REFERENCE: 4-141-029-02
MANUFACTURERS CODE: 80254
MATERIAL: STEEL CORROSION RESISTING OVERALL
THE MANUFACTURERS DATA:
Related Searches:
4-141-029-02
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306011273744
NSN
5306-01-127-3744
4-141-029-02
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306011273744
NSN
5306-01-127-3744
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
DESIGN CONTROL REFERENCE: 4-141-029-02
MANUFACTURERS CODE: 80254
MATERIAL: STEEL CORROSION RESISTING OVERALL
THE MANUFACTURERS DATA:
Related Searches:
122897-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
122897-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
SPS TECHNOLOGIES INC
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC763-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
GS1032-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
B & B SPECIALTIES INC . DBA G S AEROSPACE DIVISION DIV GS AEROSPACE
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HP7753-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
HEARTLAND PRECISION FASTENERS INC.
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MB156-8-82
BOLT,SHEAR
NSN, MFG P/N
5306011273747
NSN
5306-01-127-3747
MFG
HI-SHEAR CORPORATION
Description
EXTENDED WASHER DIAMETER: 0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
FASTENER LENGTH: 5.877 INCHES MINIMUM AND 5.907 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 5.115 INCHES MINIMUM AND 5.135 INCHES MAXIMUM
HEAD HEIGHT: 0.358 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.742 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
