My Quote Request
No products added yet
5305-01-469-6307
20 Products
256202 PC22
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305014696307
NSN
5305-01-469-6307
MFG
NAVAL SEA SYSTEMS COMMAND
Description
EXTENDED WASHER DIAMETER: 0.281 INCHES NOMINAL
EXTERNAL THREAD TOLERANCE CLASS: 3A
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: C117 CHAMFER FLANGE
III END ITEM IDENTIFICATION: LOS ANGELES CLASS SSN(688)
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
NONSTANDARD THREAD PITCH DIAMETER: 0.2350 TO 0.2650 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD PITCH IN MILLIMETERS: 1.27
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL
Related Searches:
NAS623-3-96
SCREW,MACHINE
NSN, MFG P/N
5305014695838
NSN
5305-01-469-5838
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 6.276 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
III END ITEM IDENTIFICATION: C141 ACFT
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS623 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.276 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
323-0212-00
SCREW,MACHINE
NSN, MFG P/N
5305014696019
NSN
5305-01-469-6019
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
III END ITEM IDENTIFICATION: CH-53G HELICOPTER
Related Searches:
3MB-168
SCREW,MACHINE
NSN, MFG P/N
5305014696051
NSN
5305-01-469-6051
MFG
SULZER METCO US INC.
Description
III END ITEM IDENTIFICATION: SPRAYGUN 3MB-11
Related Searches:
3MB-168
SCREW,MACHINE
NSN, MFG P/N
5305014696051
NSN
5305-01-469-6051
MFG
METCO INC SUB OF THE PERKIN-ELMER CORP
Description
III END ITEM IDENTIFICATION: SPRAYGUN 3MB-11
Related Searches:
0568031-3
SETSCREW
NSN, MFG P/N
5305014696058
NSN
5305-01-469-6058
MFG
AIMPOINT INC. DBA AIMPOINT
Description
SPECIAL FEATURES: CONSISTS OF MATERIAL PARN NUMBER 0568095, 0568096, 0568097, AND 0568098A ADJUSTMENT SCREW FOR COMP SINGLE PRININ WHITE COLOUR; REPLACES PART NUMBER 0568031-2
Related Searches:
0.25020UNC2A0.750T2G574SEK
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305014696091
NSN
5305-01-469-6091
0.25020UNC2A0.750T2G574SEK
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305014696091
NSN
5305-01-469-6091
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
CRITICALITY CODE JUSTIFICATION: ZZZW
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
MANUFACTURERS CODE: 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 0.25020UNC2A0.750T2G574SEK
SPEC/STD CONTROLLING DATA:
Related Searches:
36810-2ITEM181
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305014696091
NSN
5305-01-469-6091
MFG
ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC
Description
CRITICALITY CODE JUSTIFICATION: ZZZW
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
MANUFACTURERS CODE: 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: 0.25020UNC2A0.750T2G574SEK
SPEC/STD CONTROLLING DATA:
Related Searches:
NAS1190-08P40B
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305014696173
NSN
5305-01-469-6173
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 2.500 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE: C32 PAN
III END ITEM IDENTIFICATION: BLOCK 89 UPGR
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR AMS6415 ASSN STD 2ND MATERIAL RESPONSE OR MIL-2-5000 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1190 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
15C7989-68
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305014696205
NSN
5305-01-469-6205
MFG
SUNDSTRAND CORP
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SPECIAL FEATURES: HEAT TREAT SCREW SHALL BE EMBRITTLEMENT RELIEVED AT 190 DEGREES CELSIUS MINIMUM FOR NOT LESS THAN 3 HOURS
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
3M1170D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HP1170D4D7
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
HEARTLAND PRECISION FASTENERS INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1027D4D7A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305014696210
NSN
5305-01-469-6210
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.848 INCHES MINIMUM AND 0.878 INCHES MAXIMUM
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.385 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT DIAMETER: 0.425 INCHES NOMINAL
POINT STYLE: F19 FLAT
SPECIAL FEATURES: 125 KSI SHEAR STRENGTH
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
B1821AH025F300N
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305014696224
NSN
5305-01-469-6224
B1821AH025F300N
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305014696224
NSN
5305-01-469-6224
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: STEEL UNS K04100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A354 GR 8, GR BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
