My Quote Request
No products added yet
5305-01-277-4993
20 Products
3M1034D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
WEST COAST AEROSPACE INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4075D5-10-33
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305012774993
NSN
5305-01-277-4993
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B; THREADED HOLE 0.300 IN. MIN 0.345 IN. MAX DP; COUNTERBORE 0.145 IN. MIN LG,0.150 IN. MAX LG; 0.060 IN. WIDE IN. WIDE IN UNTHREADED SHANK; DISTANT FROM TOP OF HEAD TO BEGINNING OF INJECTION PORT 0.330
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
001.500-06UNC-2AX4.500
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012775692
NSN
5305-01-277-5692
001.500-06UNC-2AX4.500
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012775692
NSN
5305-01-277-5692
MFG
NAVAL INVENTORY CONTROL POINT MECHANICSBURG
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 688-1864 APPX 1
MANUFACTURERS CODE: 96169
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
Related Searches:
1.50006UNC2A4.500T1GB7SDC
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012775692
NSN
5305-01-277-5692
1.50006UNC2A4.500T1GB7SDC
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012775692
NSN
5305-01-277-5692
MFG
ELECTRIC BOAT CORPORATION
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 688-1864 APPX 1
MANUFACTURERS CODE: 96169
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
Related Searches:
688-1864 APPX 1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012775692
NSN
5305-01-277-5692
688-1864 APPX 1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305012775692
NSN
5305-01-277-5692
MFG
ELECTRIC BOAT CORPORATION
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 688-1864 APPX 1
MANUFACTURERS CODE: 96169
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
Related Searches:
90011A317
SCREW,WOOD
NSN, MFG P/N
5305012775891
NSN
5305-01-277-5891
Description
SCREW,WOOD
Related Searches:
M600008
SCREW,WOOD
NSN, MFG P/N
5305012775891
NSN
5305-01-277-5891
MFG
MGR EQUIPMENT CORP
Description
SCREW,WOOD
Related Searches:
A1.BFS.6016
SCREW,TAPPING,THREAD CUTTING
NSN, MFG P/N
5305012775892
NSN
5305-01-277-5892
A1.BFS.6016
SCREW,TAPPING,THREAD CUTTING
NSN, MFG P/N
5305012775892
NSN
5305-01-277-5892
MFG
ALLMETAL SCREW PRODUCTS CORP DBA ALL METAL SCREW PRODUCTS
Description
SCREW,TAPPING,THREAD CUTTING
Related Searches:
90283A825
SCREW,MACHINE
NSN, MFG P/N
5305012775898
NSN
5305-01-277-5898
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: ZINC
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
90283A825
SCREW,MACHINE
NSN, MFG P/N
5305012775898
NSN
5305-01-277-5898
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: ZINC
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
82063
SETSCREW
NSN, MFG P/N
5305012775900
NSN
5305-01-277-5900
MFG
BARRETT FIREARMS USA INC.
Description
SETSCREW
Related Searches:
91376A532
SETSCREW
NSN, MFG P/N
5305012775900
NSN
5305-01-277-5900
Description
SETSCREW
Related Searches:
200-SA15
SCREW,MACHINE
NSN, MFG P/N
5305012776211
NSN
5305-01-277-6211
MFG
RHINE AIR INC
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW SURFACE TREATMENT: ZINC
THREAD CLASS: 3A
THREAD DIRECTION: LEFT-HAND
THREAD LENGTH: 0.679 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
12311781-15
SCREW,MACHINE
NSN, MFG P/N
5305012776212
NSN
5305-01-277-6212
MFG
FABORY U.S.A. LTD.
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 8.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 4.5 MILLIMETERS NOMINAL
HEAD HEIGHT: 1.6 MILLIMETERS NOMINAL
HEAD STYLE: A36 FLUSH
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 2.5 MILLIMETERS
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: DIN267 A2 NATIONAL SPEC SINGLE MATERIAL RESPONSE
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 7.1 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 0.45
THREAD SERIES DESIGNATOR: M
