My Quote Request
No products added yet
5305-01-150-7731
20 Products
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
HARDWARE SPECIALTY CO. INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
2653570
SCREW,ADJUSTING FUE
NSN, MFG P/N
5305011506639
NSN
5305-01-150-6639
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-SOUTH BEND BENDIX DR
Description
DESIGN CONTROL REFERENCE: 2653570
GENERAL CHARACTERISTICS ITEM DESCRIPTION: CRES 1.250 IN. LG
III END ITEM IDENTIFICATION: AIRCRAFT ENGINE F404-GE-400
MANUFACTURERS CODE: 06848
THE MANUFACTURERS DATA:
Related Searches:
2663949
SCREW,ADJUSTING
NSN, MFG P/N
5305011506654
NSN
5305-01-150-6654
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-SOUTH BEND BENDIX DR
Description
DESIGN CONTROL REFERENCE: 2663949
III END ITEM IDENTIFICATION: AIRCRAFT MODEL A-18,F-18
MANUFACTURERS CODE: 06848
THE MANUFACTURERS DATA:
Related Searches:
437B121
SCREW,ADJUSTING,SPE
NSN, MFG P/N
5305011506908
NSN
5305-01-150-6908
MFG
EATON CORPORATION DIV ELECTRICAL SENSING AND CONTROLS
Description
DESIGN CONTROL REFERENCE: 437B121
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL PER AMS 5643; PASSIVATED; HEAT TREATED TO RC 30-34; 2.610 IN. O/A LG; 0.138-32 UNC-2A THD SHANK; ONE END SLOTTED
III END ITEM IDENTIFICATION: AIRCRAFT MODEL F-18
MANUFACTURERS CODE: 17472
THE MANUFACTURERS DATA:
Related Searches:
437B121
SCREW,ADJUSTING,SPE
NSN, MFG P/N
5305011506908
NSN
5305-01-150-6908
MFG
EATON MOTOR SITE
Description
DESIGN CONTROL REFERENCE: 437B121
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL PER AMS 5643; PASSIVATED; HEAT TREATED TO RC 30-34; 2.610 IN. O/A LG; 0.138-32 UNC-2A THD SHANK; ONE END SLOTTED
III END ITEM IDENTIFICATION: AIRCRAFT MODEL F-18
MANUFACTURERS CODE: 17472
THE MANUFACTURERS DATA:
Related Searches:
250-4775660
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507183
NSN
5305-01-150-7183
MFG
NAVAL SHIP SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 60-16-5597
FASTENER LENGTH: 10.000 INCHES NOMINAL
HEAD DIAMETER: 1.875 INCHES NOMINAL
HEAD HEIGHT: 1.485 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96169
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 1.250 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 7
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL
Related Searches:
250-4775660ITEM22
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507183
NSN
5305-01-150-7183
250-4775660ITEM22
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507183
NSN
5305-01-150-7183
MFG
NAVAL SHIP SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 60-16-5597
FASTENER LENGTH: 10.000 INCHES NOMINAL
HEAD DIAMETER: 1.875 INCHES NOMINAL
HEAD HEIGHT: 1.485 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96169
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 1.250 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 7
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL
Related Searches:
60-16-5597
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507183
NSN
5305-01-150-7183
MFG
ELECTRIC BOAT CORPORATION
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 60-16-5597
FASTENER LENGTH: 10.000 INCHES NOMINAL
HEAD DIAMETER: 1.875 INCHES NOMINAL
HEAD HEIGHT: 1.485 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96169
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 1.250 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 7
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL
Related Searches:
87725-2801 ITEM 23
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507183
NSN
5305-01-150-7183
87725-2801 ITEM 23
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507183
NSN
5305-01-150-7183
MFG
ELECTRIC BOAT CORPORATION
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 60-16-5597
FASTENER LENGTH: 10.000 INCHES NOMINAL
HEAD DIAMETER: 1.875 INCHES NOMINAL
HEAD HEIGHT: 1.485 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 96169
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 1.250 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 7
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL
Related Searches:
NAS1102E4-18P
SCREW,MACHINE
NSN, MFG P/N
5305011507730
NSN
5305-01-150-7730
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
HEAD DIAMETER: 0.742 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B5 TORQUE SET
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.886 INCHES MINIMUM AND 1.019 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
NOR-CAL SUPPLY CO.INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
LONG-LOK FASTENERS CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
APCOM INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
PLASTIC AND METAL PRODUCTS CORP ORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
ND INDUSTRIES INC. DIV EASTERN DIVISION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1189E06T10L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011507731
NSN
5305-01-150-7731
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.231 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.475 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
