My Quote Request
No products added yet
5305-00-558-2865
20 Products
12Z1132-27
SCREW,MACHINE
NSN, MFG P/N
5305005582865
NSN
5305-00-558-2865
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS514P632-16
SCREW,MACHINE
NSN, MFG P/N
5305005582609
NSN
5305-00-558-2609
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.233 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS517-6-7
SCREW,MACHINE
NSN, MFG P/N
5305005582610
NSN
5305-00-558-2610
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.047 INCHES MINIMUM AND 1.092 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.692 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SCREW MATERIAL: STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.511 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS601-14
SCREW,MACHINE
NSN, MFG P/N
5305005582773
NSN
5305-00-558-2773
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.850 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL COMP 8630 OR STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: M1L-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS601 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.788 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS333CP12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305005582774
NSN
5305-00-558-2774
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.142 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES NOMINAL FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS333 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES TOP OF HEAD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS333CPA25
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305005582777
NSN
5305-00-558-2777
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.640 INCHES MINIMUM AND 2.687 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS333 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS333CPA14
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305005582778
NSN
5305-00-558-2778
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.515 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS333 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS514P440-16
SCREW,MACHINE
NSN, MFG P/N
5305005582779
NSN
5305-00-558-2779
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD DIAMETER: 0.183 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.955 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS335CPA12-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305005582780
NSN
5305-00-558-2780
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.389 INCHES MINIMUM AND 1.436 INCHES MAXIMUM
GRIP DIAMETER: 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
GRIP LENGTH: 0.864 INCHES MINIMUM AND 0.884 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS335 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS334CPA6-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305005582787
NSN
5305-00-558-2787
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.827 INCHES MINIMUM AND 0.874 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.364 INCHES MINIMUM AND 0.384 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS334 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS334CPA6-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305005582787
NSN
5305-00-558-2787
MFG
BE AEROSPACE INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.827 INCHES MINIMUM AND 0.874 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 0.364 INCHES MINIMUM AND 0.384 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS334 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN565A6H14
SETSCREW
NSN, MFG P/N
5305005582790
NSN
5305-00-558-2790
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565A6H14
FASTENER LENGTH: 0.875 INCHES NOMINAL
HARDNESS RATING: 64.0 ROCKWELL SUPERFICIAL 30-N NOMINAL OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 1 STYLE
POINT STYLE: F19 FLAT
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.063 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
Related Searches:
AN565DC1032H6
SETSCREW
NSN, MFG P/N
5305005582792
NSN
5305-00-558-2792
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
SETSCREW
Related Searches:
AN565DC1032H14
SETSCREW
NSN, MFG P/N
5305005582793
NSN
5305-00-558-2793
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565DC1032H4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
AN565DC1032H4
SETSCREW
NSN, MFG P/N
5305005582793
NSN
5305-00-558-2793
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565DC1032H4
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 88044
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 4 STYLE
POINT STYLE: F20 CUP
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
Related Searches:
003-005048
SCREW,MACHINE
NSN, MFG P/N
5305005582857
NSN
5305-00-558-2857
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MULTIPLE
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
12Z1132-44
SCREW,MACHINE
NSN, MFG P/N
5305005582857
NSN
5305-00-558-2857
MFG
NAVAL ORDNANCE STANDARDS
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305005582857
NSN
5305-00-558-2857
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
SB82CP28
SCREW,MACHINE
NSN, MFG P/N
5305005582857
NSN
5305-00-558-2857
MFG
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
34910-172
SCREW,MACHINE
NSN, MFG P/N
5305005582865
NSN
5305-00-558-2865
MFG
GAF CORP BROOKLYN PLANT
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
