My Quote Request
No products added yet
5305-00-177-5656
20 Products
92412
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001775656
NSN
5305-00-177-5656
MFG
GOODRICH CORPORATION DBA GOODRICH PUMP ENG CTRL SYSTEMS DIV GOODRICH PUMP& ENGINE CONTROL SYSTEMS INC.
Description
DESIGN CONTROL REFERENCE: 92412
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 11599
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
92412
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001775656
NSN
5305-00-177-5656
MFG
GOODRICH CONTROL SYSTEMS GMBH
Description
DESIGN CONTROL REFERENCE: 92412
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E11 ROUND INTERNAL HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 11599
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
15B98
SCREW,MACHINE
NSN, MFG P/N
5305001775657
NSN
5305-00-177-5657
MFG
BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV
Description
DESIGN CONTROL REFERENCE: 15B98
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.895 INCHES MAXIMUM
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96152
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 1008
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: M-S SPEC 284-154 FSCM 96152 MFR REF 1ST TREATMENT RESPONSE OR M-S SPEC 284-162 FSCM 96152 MFR REF 2ND TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.773 INCHES MINIMUM AND 0.895 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
15B108
SCREW,MACHINE
NSN, MFG P/N
5305001775658
NSN
5305-00-177-5658
MFG
BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV
Description
DESIGN CONTROL REFERENCE: 15B108
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 96152
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 1008
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: M-S SPEC 284-154 FSCM 96152 MFR REF 1ST TREATMENT RESPONSE OR M-S SPEC 284-162 FSCM 96152 MFR REF 2ND TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
Related Searches:
15B105
SETSCREW
NSN, MFG P/N
5305001775659
NSN
5305-00-177-5659
MFG
BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV
Description
DESIGN CONTROL REFERENCE: 15B105
FASTENER LENGTH: 0.782 INCHES MINIMUM AND 0.842 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD HEIGHT: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96152
MATERIAL: STEEL COMP 12L14 OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
POINT DIAMETER: 0.247 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
POINT LENGTH: 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM
POINT STYLE: F10 DOG
SURFACE TREATMENT: CHROMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 284-153 FSCM 96152 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.562 INCHES NOMINAL
Related Searches:
67077-3-7
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001775664
NSN
5305-00-177-5664
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.808 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
67077-3-7
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001775664
NSN
5305-00-177-5664
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.808 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
GB511J3-7
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001775664
NSN
5305-00-177-5664
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.808 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT193LB3-7
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001775664
NSN
5305-00-177-5664
MFG
HI-SHEAR CORPORATION
Description
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.808 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT8099-3-7
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001775664
NSN
5305-00-177-5664
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
FASTENER LENGTH: 0.761 INCHES MINIMUM AND 0.808 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R54520 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: DRY FILM LUBRICANT
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FFS85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305001775665
NSN
5305-00-177-5665
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-452
FASTENER LENGTH: 4.906 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.582 INCHES MINIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
MS35307-452
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305001775665
NSN
5305-00-177-5665
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35307-452
FASTENER LENGTH: 4.906 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.562 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.582 INCHES MINIMUM
THREAD QUANTITY PER INCH: 12
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
Related Searches:
Q6531-01-03
SCREW,MACHINE
NSN, MFG P/N
5305001775666
NSN
5305-00-177-5666
MFG
GE AVIATION SYSTEMS LLC
Description
DESIGN CONTROL REFERENCE: Q6531-01-03
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 35351
NOMINAL THREAD DIAMETER: 0.073 INCHES
SCREW MATERIAL: STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: LS20782 FSCM 35351 MFR REF SINGLE MATERIAL RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.126 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001775668
NSN
5305-00-177-5668
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51849-120
FASTENER LENGTH: 1.440 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD HEIGHT: 0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 10S STYLE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.329 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
MS51849-120
SCREW,MACHINE
NSN, MFG P/N
5305001775668
NSN
5305-00-177-5668
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51849-120
FASTENER LENGTH: 1.440 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD HEIGHT: 0.208 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
HEAD STYLE: A1 HEXAGON
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 10S STYLE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.329 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
NAS388-6-12
SCREW,MACHINE
NSN, MFG P/N
5305001775679
NSN
5305-00-177-5679
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE: A42 OVAL COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.667 INCHES MINIMUM AND 0.681 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS27039C1-23
SCREW,MACHINE
NSN, MFG P/N
5305001775680
NSN
5305-00-177-5680
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.454 INCHES MINIMUM AND 1.501 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.377 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS27039C1-23
SCREW,MACHINE
NSN, MFG P/N
5305001775680
NSN
5305-00-177-5680
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 1.454 INCHES MINIMUM AND 1.501 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.377 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CVC241-3-14
SCREW,MACHINE
NSN, MFG P/N
5305001775688
NSN
5305-00-177-5688
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: CVC241-3-14
FASTENER LENGTH: 0.891 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.306 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 80378
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.423 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
CVC241-3-14
SCREW,MACHINE
NSN, MFG P/N
5305001775688
NSN
5305-00-177-5688
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: CVC241-3-14
FASTENER LENGTH: 0.891 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.306 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 80378
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.423 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
