My Quote Request
No products added yet
5305-00-150-3069
20 Products
CVC128-416R7
SCREW,MACHINE
NSN, MFG P/N
5305001503069
NSN
5305-00-150-3069
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 135.0 DEGREES NOMINAL
FASTENER LENGTH: 0.406 INCHES NOMINAL
HEAD DIAMETER: 0.315 INCHES NOMINAL
HEAD STYLE: A41 FLAT TOP ELEVATOR
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
CVC241A4-7
SCREW,MACHINE
NSN, MFG P/N
5305001503069
NSN
5305-00-150-3069
MFG
VOUGHT AIRCRAFT INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 135.0 DEGREES NOMINAL
FASTENER LENGTH: 0.406 INCHES NOMINAL
HEAD DIAMETER: 0.315 INCHES NOMINAL
HEAD STYLE: A41 FLAT TOP ELEVATOR
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
343-0017-000
SCREW,MACHINE
NSN, MFG P/N
5305001503079
NSN
5305-00-150-3079
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-11B
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.044 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001503079
NSN
5305-00-150-3079
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-11B
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.044 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS51957-11B
SCREW,MACHINE
NSN, MFG P/N
5305001503079
NSN
5305-00-150-3079
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-11B
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.044 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
P343-0017-000
SCREW,MACHINE
NSN, MFG P/N
5305001503079
NSN
5305-00-150-3079
MFG
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS51957-11B
FASTENER LENGTH: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: OXIDE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.044 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
859264-00
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001503080
NSN
5305-00-150-3080
MFG
DEFENSE REDUCTION AGENCY MS 6201
Description
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: STRIP THREADS
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.158 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
NAS1352C06LL4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001503080
NSN
5305-00-150-3080
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: STRIP THREADS
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.158 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
TS1352C06LL4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001503080
NSN
5305-00-150-3080
MFG
TORKON FASTENER CORP
Description
FASTENER LENGTH: 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: STRIP THREADS
MATERIAL: PLASTIC POLYAMIDE LOCKING FEATURE STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.158 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
603-0003-001
SCREW,MACHINE
NSN, MFG P/N
5305001503081
NSN
5305-00-150-3081
MFG
L-3 COMMUNICATIONS AVIONICS SYSTEMS INC
Description
DESIGN CONTROL REFERENCE: 603-0003-001
FASTENER LENGTH: 0.084 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD DIAMETER: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD HEIGHT: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM
HEAD STYLE: A22 OVAL
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 25583
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: COPPER ALLOY
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.059 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
603-0003-001
SCREW,MACHINE
NSN, MFG P/N
5305001503081
NSN
5305-00-150-3081
MFG
BFGOODRICH AEROSPACE COMPONENT OVERHAUL AND REPAIR INC
Description
DESIGN CONTROL REFERENCE: 603-0003-001
FASTENER LENGTH: 0.084 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD DIAMETER: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD HEIGHT: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM
HEAD STYLE: A22 OVAL
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 25583
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: COPPER ALLOY
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.059 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
0(.060)-80NF-2AX5/8L
SCREW,MACHINE
NSN, MFG P/N
5305001503083
NSN
5305-00-150-3083
MFG
CENTURY FASTENERS CORP .
Description
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD HEIGHT: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
117356
SCREW,MACHINE
NSN, MFG P/N
5305001503083
NSN
5305-00-150-3083
MFG
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I
Description
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD HEIGHT: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
117356-15
SCREW,MACHINE
NSN, MFG P/N
5305001503083
NSN
5305-00-150-3083
MFG
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I
Description
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD HEIGHT: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
LIQ501C0-10
SCREW,MACHINE
NSN, MFG P/N
5305001503083
NSN
5305-00-150-3083
MFG
SIMMONDS PRECISION PRODUCTS INC. DBA GOODRICH SENSORS AND INTERGRATED SYSTMES
Description
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD DIAMETER: 0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD HEIGHT: 0.029 INCHES MINIMUM AND 0.038 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.569 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN500AD8-7
SCREW,MACHINE
NSN, MFG P/N
5305001503084
NSN
5305-00-150-3084
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AD8-7
FASTENER LENGTH: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5S STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92
SCREW,MACHINE
NSN, MFG P/N
5305001503084
NSN
5305-00-150-3084
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500AD8-7
FASTENER LENGTH: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A33 FILLISTER
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5S STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.344 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
LK1191C02P4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001503085
NSN
5305-00-150-3085
MFG
TORKON FASTENER CORP
Description
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.044 INCHES MINIMUM AND 0.053 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PELLET OR STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1191 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.183 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1191C02P4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001503085
NSN
5305-00-150-3085
MFG
HARDWARE SPECIALTY CO. INC.
Description
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.044 INCHES MINIMUM AND 0.053 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PELLET OR STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1191 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.183 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1191C02P4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001503085
NSN
5305-00-150-3085
MFG
NOR-CAL SUPPLY CO.INC.
Description
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HARDNESS RATING: 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER: 0.136 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.044 INCHES MINIMUM AND 0.053 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PELLET OR STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1191 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.183 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNJC
