My Quote Request
No products added yet
5305-00-107-1985
20 Products
150005-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071985
NSN
5305-00-107-1985
MFG
MONADNOCK COMPANY THE DBA LISI AEROSPACE
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.612 INCHES MINIMUM AND 0.659 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.496 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.254 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B294-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071985
NSN
5305-00-107-1985
MFG
NORTHROP GRUMMAN TECHNICAL SERVICES INC.
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.612 INCHES MINIMUM AND 0.659 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.496 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.254 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B294-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071985
NSN
5305-00-107-1985
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV INTEGRATED SYSTEMS SECTOR
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.612 INCHES MINIMUM AND 0.659 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.496 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.254 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
150001-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
MONADNOCK COMPANY THE DBA LISI AEROSPACE
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
NORTHROP GRUMMAN TECHNICAL SERVICES INC.
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
51B293-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305001071986
NSN
5305-00-107-1986
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV INTEGRATED SYSTEMS SECTOR
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 430FSE OR STEEL COMP 81B45 OR STEEL COMP 4140 OR STEEL COMP 302B OVERALL
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIAL FEATURES: ALUMINUM GROMMET 0.012 IN. THK ON BEARING SURFACE OF HEAD
SURFACE FINISH: 32.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
218537
SCREW,MACHINE
NSN, MFG P/N
5305001071987
NSN
5305-00-107-1987
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DESIGN CONTROL REFERENCE: 218537
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.113 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C6 HEXAGON FLATS
HEAD STYLE: A1 HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 66503
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: SLOT TO BE AT RIGHT ANGLE WITH DRILLEDHOLE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.688 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
Related Searches:
218537
SCREW,MACHINE
NSN, MFG P/N
5305001071987
NSN
5305-00-107-1987
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DESIGN CONTROL REFERENCE: 218537
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD HEIGHT: 0.113 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C6 HEXAGON FLATS
HEAD STYLE: A1 HEXAGON
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 1
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 66503
NOMINAL THREAD DIAMETER: 0.164 INCHES
SCREW MATERIAL: STEEL COMP 4037
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: SLOT TO BE AT RIGHT ANGLE WITH DRILLEDHOLE
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.688 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
Related Searches:
LK1189-04P3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001071989
NSN
5305-00-107-1989
MFG
TORKON FASTENER CORP
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.062 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE OVERALL
Related Searches:
NAS1189-04P3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001071989
NSN
5305-00-107-1989
MFG
HARDWARE SPECIALTY CO. INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.062 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE OVERALL
Related Searches:
NAS1189-04P3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001071989
NSN
5305-00-107-1989
MFG
NOR-CAL SUPPLY CO.INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.062 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE OVERALL
Related Searches:
NAS1189-04P3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001071989
NSN
5305-00-107-1989
MFG
LONG-LOK FASTENERS CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.062 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE OVERALL
Related Searches:
NAS1189-04P3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001071989
NSN
5305-00-107-1989
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.062 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE OVERALL
Related Searches:
NAS1189-04P3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305001071989
NSN
5305-00-107-1989
MFG
APCOM INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.062 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: RESPONSE OVERALL
