My Quote Request
No products added yet
3110-01-090-3179
20 Products
REP3F4FS210
BEARING,BALL,ROD END
NSN, MFG P/N
3110010903179
NSN
3110-01-090-3179
MFG
ROLLER BEARING COMPANY OF AMERICA INC. DBA RBC HEIM BEARINGS DIVISION
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
INNER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL ROD END BODY RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE BALL REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE INNER RING REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE OUTER RING REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM
OVERALL LENGTH: 1.7660 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 0.10 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM
SHANK STYLE: 655 INTERNALLY THREADED W/BEAD
SHANK THREAD LENGTH: 0.7500 INCHES NOMINAL
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.4380 INCHES NOMINAL
~1: REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE SEAL
Related Searches:
REP3F4FS210
BEARING,BALL,ROD END
NSN
3110-01-090-3179
MFG
ROLLER BEARING COMPANY OF AMERICA INC. DBA RBC HEIM BEARINGS DIVISION
Description
ALIGNMENT TYPE: SELF-ALIGNING
BEARING SEAL TYPE: CONTACT
BORE DIAMETER: 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
INNER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
LENGTH FROM BORE CENTER TO SHANK END: 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
LUBRICATION MATERIAL: GREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL: STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL ROD END BODY RUBBER SYNTHETIC SEAL
MATERIAL DOCUMENT AND CLASSIFICATION: REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE BALL REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE INNER RING REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE OUTER RING REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY
NOMINAL THREAD SIZE: 0.250 INCHES
OUTER RING WIDTH: 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM
OVERALL LENGTH: 1.7660 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM
SEAL QUANTITY: 2
SELF-ALIGNMENT ANGLE: 0.10 DEGREES NOMINAL
SELF-ALIGNMENT LOCATION: INTERNAL
SHANK DIAMETER: 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM
SHANK STYLE: 655 INTERNALLY THREADED W/BEAD
SHANK THREAD LENGTH: 0.7500 INCHES NOMINAL
STYLE DESIGNATOR: 466 DOUBLE ROW, STAGGERED, BALL
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.4380 INCHES NOMINAL
~1: REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE SEAL
Related Parts:
72054
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902833
NSN
3110-01-090-2833
MFG
POWER SYSTEMS TECHNOLOGY INC DBA SYTEK
Description
BEARING,BALL,ANNULAR
Related Searches:
72054
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902833
NSN
3110-01-090-2833
MFG
ALLIS-CHALMERS CORP
Description
BEARING,BALL,ANNULAR
Related Searches:
182T-72053
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
SIEMENS-ENERGY AND AUTOMATION INC INDUSTRIAL MOTOR DIV
Description
BEARING,BALL,ANNULAR
Related Searches:
254T-72053
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
SIEMENS-ENERGY AND AUTOMATION INC INDUSTRIAL MOTOR DIV
Description
BEARING,BALL,ANNULAR
Related Searches:
284T-72053
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
SIEMENS-ALLIS INC MEDIUM MOTOR-GENERATOR DIV
Description
BEARING,BALL,ANNULAR
Related Searches:
51-601-983-006
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
POWER SYSTEMS TECHNOLOGY INC DBA SYTEK
Description
BEARING,BALL,ANNULAR
Related Searches:
51-601-983-006
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
SIEMENS-ENERGY AND AUTOMATION INC INDUSTRIAL MOTOR DIV
Description
BEARING,BALL,ANNULAR
Related Searches:
72053
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
POWER SYSTEMS TECHNOLOGY INC DBA SYTEK
Description
BEARING,BALL,ANNULAR
Related Searches:
72053
BEARING,BALL,ANNULAR
NSN, MFG P/N
3110010902834
NSN
3110-01-090-2834
MFG
ALLIS-CHALMERS CORP
Description
BEARING,BALL,ANNULAR
Related Searches:
488983
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110010903176
NSN
3110-01-090-3176
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 1.9683 INCHES MINIMUM AND 1.9685 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III END ITEM IDENTIFICATION: J-75 ENGINE
INTERNAL CLEARANCE: 0.4610 INCHES MINIMUM AXIAL AND 0.4710 INCHES MAXIMUM AXIAL
LOCATING FEATURE: ONE DIRECTION
MATERIAL: STEEL INNER RING STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA 723,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE INNER RING PWA 723,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER PWA 723,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 2.8343 INCHES MINIMUM AND 2.8346 INCHES MAXIMUM
OVERALL WIDTH: 0.4644 INCHES MINIMUM AND 0.4694 INCHES MAXIMUM
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: RETAINER SILVER PLATED PER AMS2412 .0005-.0015 THICK ON LAND RIDING SURF AND ROLLER POCKETS,OTHER SURF OPT AND MAY BE INCOMP. NO STRIKE METAL REQD.BAKE AT 475-500F FOR TWO HRS TO CHECK FOR BOND. CAGE MUST BE INNER LAND RIDING,NONSEPARABLE
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
740853
BEARING,ROLLER,CYLINDRICAL
NSN, MFG P/N
3110010903176
NSN
3110-01-090-3176
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
BORE DIAMETER: 1.9683 INCHES MINIMUM AND 1.9685 INCHES MAXIMUM
BORE SHAPE: STRAIGHT
III END ITEM IDENTIFICATION: J-75 ENGINE
INTERNAL CLEARANCE: 0.4610 INCHES MINIMUM AXIAL AND 0.4710 INCHES MAXIMUM AXIAL
LOCATING FEATURE: ONE DIRECTION
MATERIAL: STEEL INNER RING STEEL OUTER RING COPPER ALLOY RETAINER STEEL ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION: PWA 723,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE INNER RING PWA 723,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE OUTER RING AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER PWA 723,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE ROLLER
OVERALL OUTSIDE DIAMETER: 2.8343 INCHES MINIMUM AND 2.8346 INCHES MAXIMUM
OVERALL WIDTH: 0.4644 INCHES MINIMUM AND 0.4694 INCHES MAXIMUM
RETAINER FABRICATION METHOD: FORGED
SPECIAL FEATURES: RETAINER SILVER PLATED PER AMS2412 .0005-.0015 THICK ON LAND RIDING SURF AND ROLLER POCKETS,OTHER SURF OPT AND MAY BE INCOMP. NO STRIKE METAL REQD.BAKE AT 475-500F FOR TWO HRS TO CHECK FOR BOND. CAGE MUST BE INNER LAND RIDING,NONSEPARABLE
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
STYLE DESIGNATOR: 252H SINGLE ROW, TWO-DIRECTION LOCATING, TWO LIP INNER RING, TWO LIP OUTER RING, NON-SEPARABLE
SURFACE FINISH: GROUND
Related Searches:
7Z7-018
BEARING,BALL,THRUST
NSN, MFG P/N
3110010903177
NSN
3110-01-090-3177
MFG
DESIGNATRONICS INC STOCK DRIVE PRODUCTS DIV
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1950 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COTTON RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1950 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
7Z7-018
BEARING,BALL,THRUST
NSN, MFG P/N
3110010903177
NSN
3110-01-090-3177
MFG
DESIGNATRONICS INC ORPORATED DBA STERLING INSTRUMENTS DIV
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1950 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COTTON RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1950 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
7Z7-018
BEARING,BALL,THRUST
NSN, MFG P/N
3110010903177
NSN
3110-01-090-3177
MFG
DESIGNATRONICS INC ORPORATED DBA STERLING INSTRUMENT DIV DIV STOCK DRIVE PRODUCTS
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1950 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COTTON RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1950 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
B5-2
BEARING,BALL,THRUST
NSN, MFG P/N
3110010903177
NSN
3110-01-090-3177
MFG
W. M. BERG INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1950 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COTTON RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1950 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
M206-73
BEARING,BALL,THRUST
NSN, MFG P/N
3110010903177
NSN
3110-01-090-3177
MFG
MILTOPE CORPORATION DBA VT MILTOPE
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1950 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL COTTON RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1950 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL
RETAINER FABRICATION METHOD: MOLDED
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
42584XX-2-397
CUP,TAPERED ROLLER BEARING
NSN, MFG P/N
3110010903178
NSN
3110-01-090-3178
42584XX-2-397
CUP,TAPERED ROLLER BEARING
NSN, MFG P/N
3110010903178
NSN
3110-01-090-3178
MFG
THE TIMKEN CORPORATION
Description
BACKFACE CORNER RADIUS: 0.1200 INCHES NOMINAL
MANUFACTURERS CODE: 78286
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: SB3353-201
OUTSIDE DIAMETER: 5.8437 INCHES MINIMUM AND 5.8447 INCHES MAXIMUM
OVERALL WIDTH: 0.8438 INCHES NOMINAL
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: STABILIZED FOR OPERATION FROM M65DEG F TO P250 DEG F
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STYLE DESIGNATOR: 566 NORMAL ANGLE
TEST DATA DOCUMENT: 78286-SB3353-201 SPECIFICATION
Related Searches:
SB3353-201
CUP,TAPERED ROLLER BEARING
NSN, MFG P/N
3110010903178
NSN
3110-01-090-3178
SB3353-201
CUP,TAPERED ROLLER BEARING
NSN, MFG P/N
3110010903178
NSN
3110-01-090-3178
MFG
SIKORSKY AIRCRAFT CORPORATION
Description
BACKFACE CORNER RADIUS: 0.1200 INCHES NOMINAL
MANUFACTURERS CODE: 78286
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: SB3353-201
OUTSIDE DIAMETER: 5.8437 INCHES MINIMUM AND 5.8447 INCHES MAXIMUM
OVERALL WIDTH: 0.8438 INCHES NOMINAL
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: STABILIZED FOR OPERATION FROM M65DEG F TO P250 DEG F
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STYLE DESIGNATOR: 566 NORMAL ANGLE
TEST DATA DOCUMENT: 78286-SB3353-201 SPECIFICATION
Related Searches:
SB3353-201
CUP,TAPERED ROLLER BEARING
NSN, MFG P/N
3110010903178
NSN
3110-01-090-3178
SB3353-201
CUP,TAPERED ROLLER BEARING
NSN, MFG P/N
3110010903178
NSN
3110-01-090-3178
MFG
THE TIMKEN CORPORATION
Description
BACKFACE CORNER RADIUS: 0.1200 INCHES NOMINAL
MANUFACTURERS CODE: 78286
MATERIAL: STEEL OVERALL
MFR SOURCE CONTROLLING REFERENCE: SB3353-201
OUTSIDE DIAMETER: 5.8437 INCHES MINIMUM AND 5.8447 INCHES MAXIMUM
OVERALL WIDTH: 0.8438 INCHES NOMINAL
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: STABILIZED FOR OPERATION FROM M65DEG F TO P250 DEG F
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
STYLE DESIGNATOR: 566 NORMAL ANGLE
TEST DATA DOCUMENT: 78286-SB3353-201 SPECIFICATION
