My Quote Request
No products added yet
3110-00-155-9116
20 Products
161024-3
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
NAVAL SEA SYSTEMS COMMAND
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
161024-3
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
NAVAL SEA SYSTEMS COMMAND
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
161024-3
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
161024-3
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
9195458
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
9195458
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
SCHAEFFLER GROUP USA INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559116
NSN
3110-00-155-9116
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.3750 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
144-449
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559122
NSN
3110-00-155-9122
MFG
GENERAL MOTORS CORP
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1875 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
144-449
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559122
NSN
3110-00-155-9122
MFG
GENERAL MOTORS CORP ELECTRO-MOTIVE DIV
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1875 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1 3-8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559122
NSN
3110-00-155-9122
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1875 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW13-8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559122
NSN
3110-00-155-9122
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1875 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
FT1 3/8
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559122
NSN
3110-00-155-9122
MFG
NSK UK LTD
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.3750 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.5000 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.1875 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
179717-5
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559129
NSN
3110-00-155-9129
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.7500 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.6250 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
EW1 3-4
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559129
NSN
3110-00-155-9129
MFG
FAG BEARINGS CORPORATION
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 1.7500 INCHES NOMINAL
MATERIAL: STEEL BALL STEEL WASHER
OVERALL HEIGHT: 0.6250 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 2.6250 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATOR: 152 FLAT RACE SURFACE, IN LINE BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
A01
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559137
NSN
3110-00-155-9137
MFG
GWILLIAM COMPANY INC
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1875 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1875 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 154 FLAT RACE SURFACE, STAGGERED BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
A2746
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559137
NSN
3110-00-155-9137
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1875 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1875 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 154 FLAT RACE SURFACE, STAGGERED BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
Related Searches:
A2746
BEARING,BALL,THRUST
NSN, MFG P/N
3110001559137
NSN
3110-00-155-9137
MFG
BENDIX CORP THE
Description
ALIGNMENT TYPE: RIGID
BORE SMALLEST DIAMETER: 0.1875 INCHES NOMINAL
LARGEST BORE DIAMETER: ANY ACCEPTABLE
MATERIAL: STEEL BALL STEEL OR STEEL CORROSION RESISTING RETAINER STEEL WASHER
OVERALL HEIGHT: 0.1875 INCHES NOMINAL
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
STYLE DESIGNATOR: 154 FLAT RACE SURFACE, STAGGERED BALL RETAINER
SURFACE FINISH: GROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
