My Quote Request
No products added yet
3040-01-169-7707
20 Products
754/2/38143/000
GEARSHAFT,SPUR
NSN, MFG P/N
3040011697707
NSN
3040-01-169-7707
MFG
EATON AEROSPACE LTD
Description
GEARSHAFT,SPUR
Related Searches:
4192004
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040011696617
NSN
3040-01-169-6617
MFG
BAE SYSTEMS LAND & ARMAMENTS L.P. DBA US COMBAT SYSTEMS-GROUND SYSTEMS DIV DIV GROUND SYSTEMS
Description
SPECIAL FEATURES: ALUMINUM CASTING,355 TEMP T6,OR 356 TEMP T6,QQ-A-601; GRIPPING SURFACE 9.688 IN. LG COATED WITH PLASTISOL,MIL-P-20689,TY 2,CL 2,3 OR 4; O/A LG APPROX 31.813 IN.
Related Searches:
4192003
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040011696618
NSN
3040-01-169-6618
MFG
BAE SYSTEMS LAND & ARMAMENTS L.P. DBA US COMBAT SYSTEMS-GROUND SYSTEMS DIV DIV GROUND SYSTEMS
Description
SPECIAL FEATURES: CAST ALUMINUM,AMS 4236,206.0-T4; HANDGRIP COATED WITH PLASTISOL,MIL-P-20689,TY 2,CL 2,3 OR 4,GRIP LG 9.688 IN.; O/A LG APPROX 31.813 IN.
Related Searches:
4195068
BELL CRANK
NSN, MFG P/N
3040011696703
NSN
3040-01-169-6703
MFG
BAE SYSTEMS LAND & ARMAMENTS L.P. DBA US COMBAT SYSTEMS-GROUND SYSTEMS DIV DIV GROUND SYSTEMS
Description
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 1.500 INCHES NOMINAL 1ST END 3.000 INCHES NOMINAL 2ND END
DESIGN CONTROL REFERENCE: 4195068
END HOLE/BALL DIAMETER: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM 1ST END 0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM 2ND END
MANUFACTURERS CODE: 80212
MATERIAL: STEEL
SPECIAL FEATURES: 2 AA ARMS
SURFACE TREATMENT: CADMIUM
THE MANUFACTURERS DATA:
Related Searches:
200011
SHAFT,SHOULDERED
NSN, MFG P/N
3040011697321
NSN
3040-01-169-7321
MFG
GROVE U.S. L.L.C
Description
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
FIRST END PITCH DIAMETER: 1.9160 INCHES NOMINAL
FIRST END PRESSURE ANGLE: 30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH: 1.875 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER: 1.9685 INCHES MINIMUM AND 1.9695 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER: 1.9670 INCHES MINIMUM AND 1.9680 INCHES MAXIMUM
FIRST END SPLINE QUANTITY: 23
FIRST END STYLE: 18 SPLINED
III END ITEM IDENTIFICATION: 3810-01-144-4885
LARGEST STEP DIAMETER: 2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM
MATERIAL: STEEL COMP 4140
OVERALL LENGTH: 7.398 INCHES NOMINAL
SECOND END DIAMETER: 1.7590 INCHES MINIMUM AND 1.7670 INCHES MAXIMUM
SECOND END EXTERNAL KEYWAY LENGTH: 0.906 INCHES NOMINAL
SECOND END EXTERNAL THREAD LENGTH: 0.406 INCHES NOMINAL
SECOND END KEYWAY DEPTH: ANY ACCEPTABLE
SECOND END KEYWAY WIDTH: 0.3125 INCHES NOMINAL
SECOND END STYLE: 43 EXTERNALLY THREADED AND FLAT KEYWAY
SPECIAL FEATURES: FIRST END HAS TWO INTERNAL THD HOLES,0.750 IN. THD LG,LOCATED ON A 1.000 IN. BOLT CIR DIA;SECOND END THDS ARE INDENTED;SECOND END PARTIAL BORE,0.406 IN. DP,0.911 IN. DIA
STEP QUANTITY: 4
SURFACE FINISH: 16.0 MICROINCHES
Related Searches:
6-810-002037
SHAFT,SHOULDERED
NSN, MFG P/N
3040011697321
NSN
3040-01-169-7321
MFG
GROVE U.S. L.L.C
Description
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
FIRST END PITCH DIAMETER: 1.9160 INCHES NOMINAL
FIRST END PRESSURE ANGLE: 30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH: 1.875 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER: 1.9685 INCHES MINIMUM AND 1.9695 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER: 1.9670 INCHES MINIMUM AND 1.9680 INCHES MAXIMUM
FIRST END SPLINE QUANTITY: 23
FIRST END STYLE: 18 SPLINED
III END ITEM IDENTIFICATION: 3810-01-144-4885
LARGEST STEP DIAMETER: 2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM
MATERIAL: STEEL COMP 4140
OVERALL LENGTH: 7.398 INCHES NOMINAL
SECOND END DIAMETER: 1.7590 INCHES MINIMUM AND 1.7670 INCHES MAXIMUM
SECOND END EXTERNAL KEYWAY LENGTH: 0.906 INCHES NOMINAL
SECOND END EXTERNAL THREAD LENGTH: 0.406 INCHES NOMINAL
SECOND END KEYWAY DEPTH: ANY ACCEPTABLE
SECOND END KEYWAY WIDTH: 0.3125 INCHES NOMINAL
SECOND END STYLE: 43 EXTERNALLY THREADED AND FLAT KEYWAY
SPECIAL FEATURES: FIRST END HAS TWO INTERNAL THD HOLES,0.750 IN. THD LG,LOCATED ON A 1.000 IN. BOLT CIR DIA;SECOND END THDS ARE INDENTED;SECOND END PARTIAL BORE,0.406 IN. DP,0.911 IN. DIA
STEP QUANTITY: 4
SURFACE FINISH: 16.0 MICROINCHES
Related Searches:
6-810-002037
SHAFT,SHOULDERED
NSN, MFG P/N
3040011697321
NSN
3040-01-169-7321
MFG
MINNPAR LLC
Description
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
FIRST END PITCH DIAMETER: 1.9160 INCHES NOMINAL
FIRST END PRESSURE ANGLE: 30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH: 1.875 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER: 1.9685 INCHES MINIMUM AND 1.9695 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER: 1.9670 INCHES MINIMUM AND 1.9680 INCHES MAXIMUM
FIRST END SPLINE QUANTITY: 23
FIRST END STYLE: 18 SPLINED
III END ITEM IDENTIFICATION: 3810-01-144-4885
LARGEST STEP DIAMETER: 2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM
MATERIAL: STEEL COMP 4140
OVERALL LENGTH: 7.398 INCHES NOMINAL
SECOND END DIAMETER: 1.7590 INCHES MINIMUM AND 1.7670 INCHES MAXIMUM
SECOND END EXTERNAL KEYWAY LENGTH: 0.906 INCHES NOMINAL
SECOND END EXTERNAL THREAD LENGTH: 0.406 INCHES NOMINAL
SECOND END KEYWAY DEPTH: ANY ACCEPTABLE
SECOND END KEYWAY WIDTH: 0.3125 INCHES NOMINAL
SECOND END STYLE: 43 EXTERNALLY THREADED AND FLAT KEYWAY
SPECIAL FEATURES: FIRST END HAS TWO INTERNAL THD HOLES,0.750 IN. THD LG,LOCATED ON A 1.000 IN. BOLT CIR DIA;SECOND END THDS ARE INDENTED;SECOND END PARTIAL BORE,0.406 IN. DP,0.911 IN. DIA
STEP QUANTITY: 4
SURFACE FINISH: 16.0 MICROINCHES
Related Searches:
9734-100392
SHAFT,SHOULDERED
NSN, MFG P/N
3040011697321
NSN
3040-01-169-7321
MFG
GROVE U.S. L.L.C
Description
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
FIRST END PITCH DIAMETER: 1.9160 INCHES NOMINAL
FIRST END PRESSURE ANGLE: 30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH: 1.875 INCHES NOMINAL
FIRST END SPLINE MAJOR DIAMETER: 1.9685 INCHES MINIMUM AND 1.9695 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER: 1.9670 INCHES MINIMUM AND 1.9680 INCHES MAXIMUM
FIRST END SPLINE QUANTITY: 23
FIRST END STYLE: 18 SPLINED
III END ITEM IDENTIFICATION: 3810-01-144-4885
LARGEST STEP DIAMETER: 2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM
MATERIAL: STEEL COMP 4140
OVERALL LENGTH: 7.398 INCHES NOMINAL
SECOND END DIAMETER: 1.7590 INCHES MINIMUM AND 1.7670 INCHES MAXIMUM
SECOND END EXTERNAL KEYWAY LENGTH: 0.906 INCHES NOMINAL
SECOND END EXTERNAL THREAD LENGTH: 0.406 INCHES NOMINAL
SECOND END KEYWAY DEPTH: ANY ACCEPTABLE
SECOND END KEYWAY WIDTH: 0.3125 INCHES NOMINAL
SECOND END STYLE: 43 EXTERNALLY THREADED AND FLAT KEYWAY
SPECIAL FEATURES: FIRST END HAS TWO INTERNAL THD HOLES,0.750 IN. THD LG,LOCATED ON A 1.000 IN. BOLT CIR DIA;SECOND END THDS ARE INDENTED;SECOND END PARTIAL BORE,0.406 IN. DP,0.911 IN. DIA
STEP QUANTITY: 4
SURFACE FINISH: 16.0 MICROINCHES
Related Searches:
5S4476
HOUSING,MECHANICAL DRIVE
NSN, MFG P/N
3040011697385
NSN
3040-01-169-7385
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
HOUSING,MECHANICAL DRIVE
Related Searches:
02183400
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040011697388
NSN
3040-01-169-7388
MFG
ORSCHELN PRODUCTS L.L.C. DBA ORSCHELN
Description
END ITEM IDENTIFICATION: 3930-01-059-0952
SPECIAL FEATURES: 14.840 IN.O/A LG;4 BOLT HOLES 0.312 IN.DIA;0.880 IN. DIA ONE END
Related Searches:
02324400
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040011697388
NSN
3040-01-169-7388
MFG
ORSCHELN PRODUCTS L.L.C. DBA ORSCHELN
Description
END ITEM IDENTIFICATION: 3930-01-059-0952
SPECIAL FEATURES: 14.840 IN.O/A LG;4 BOLT HOLES 0.312 IN.DIA;0.880 IN. DIA ONE END
Related Searches:
LA-889-8
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040011697388
NSN
3040-01-169-7388
MFG
TIFFIN PARTS L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP.
Description
END ITEM IDENTIFICATION: 3930-01-059-0952
SPECIAL FEATURES: 14.840 IN.O/A LG;4 BOLT HOLES 0.312 IN.DIA;0.880 IN. DIA ONE END
Related Searches:
LA-889-8
LEVER,MANUAL CONTROL
NSN, MFG P/N
3040011697388
NSN
3040-01-169-7388
MFG
PETTIBONE LLC
Description
END ITEM IDENTIFICATION: 3930-01-059-0952
SPECIAL FEATURES: 14.840 IN.O/A LG;4 BOLT HOLES 0.312 IN.DIA;0.880 IN. DIA ONE END
Related Searches:
2666675
CONNECTING LINK,RIGID
NSN, MFG P/N
3040011697418
NSN
3040-01-169-7418
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-SOUTH BEND BENDIX DR
Description
(NON-CORE DATA) MATERIAL: STEEL, CORROSION RESISTING
(NON-CORE DATA) SURFACE TREATMENT: PASSIVATED
BODY CONSTRUCTION: SOLID
BODY THICKNESS: 0.100 INCHES NOMINAL
BODY WIDTH: 0.310 INCHES NOMINAL
LINK STYLE: A9 RAISED FACE ENDS
OVERALL LENGTH: 1.345 INCHES NOMINAL
Related Searches:
4189490
ARM,LINKAGE,RANGE S
NSN, MFG P/N
3040011697548
NSN
3040-01-169-7548
MFG
BAE SYSTEMS LAND & ARMAMENTS L.P. DBA US COMBAT SYSTEMS-GROUND SYSTEMS DIV DIV GROUND SYSTEMS
Description
ARM,LINKAGE,RANGE S
Related Searches:
4189479
HOUSING,SHAFT
NSN, MFG P/N
3040011697549
NSN
3040-01-169-7549
MFG
BAE SYSTEMS LAND & ARMAMENTS L.P. DBA US COMBAT SYSTEMS-GROUND SYSTEMS DIV DIV GROUND SYSTEMS
Description
HOUSING,SHAFT
Related Searches:
307507-00-9
SHAFT,STRAIGHT
NSN, MFG P/N
3040011697566
NSN
3040-01-169-7566
MFG
LESLIE CONTROLS INC.
Description
END SIMILARITY: NOT IDENTICAL
FIRST END DIAMETER: 0.0250 INCHES NOMINAL
FIRST END STYLE: 1 PLAIN
MATERIAL: STEEL
OVERALL LENGTH: 1.328 INCHES NOMINAL
SECOND END DIAMETER: 0.0250 INCHES NOMINAL
SECOND END STEP LENGTH: 0.062 INCHES NOMINAL
SECOND END STYLE: 19 TONGUE ROUNDED ENDS
SECOND END TONGUE THICKNESS: 0.016 INCHES NOMINAL
SECOND END TONGUE WIDTH: 0.025 INCHES NOMINAL
Related Searches:
7606-8086
SHAFT,SHOULDERED
NSN, MFG P/N
3040011697657
NSN
3040-01-169-7657
MFG
DRS ICAS, LLC
Description
LARGEST STEP DIAMETER: 2.625 INCHES NOMINAL
MATERIAL: ALUMINUM ALLOY 2024
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 6.687 INCHES NOMINAL
STEP QUANTITY: 2
Related Searches:
7606-8086-101
SHAFT,SHOULDERED
NSN, MFG P/N
3040011697657
NSN
3040-01-169-7657
MFG
DRS ICAS, LLC
Description
LARGEST STEP DIAMETER: 2.625 INCHES NOMINAL
MATERIAL: ALUMINUM ALLOY 2024
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH: 6.687 INCHES NOMINAL
STEP QUANTITY: 2
Related Searches:
4188944
SHAFT,HOLLOW
NSN, MFG P/N
3040011697668
NSN
3040-01-169-7668
MFG
BAE SYSTEMS LAND & ARMAMENTS L.P. DBA US COMBAT SYSTEMS-GROUND SYSTEMS DIV DIV GROUND SYSTEMS
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: SHAFT,CARBON STEEL,ASTM A519; ARM AND END,CARBON STEEL,QQ-S-741; CADMIUM PLATE,QQ-P-416,TY 2,CL 3,OVERALL; O/A LG 17.000 IN.; SHAFT OD 1.750 IN.,0.188 IN. WALL; ARM 0.500 IN. THK,END 1.000 IN. THK; ARM LG 6.062 IN.
