My Quote Request
No products added yet
2530-00-033-5145
20 Products
0RO-23398-003
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
0RO-23398-003
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
TIFFIN PARTS L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
Related Searches:
9730E2011
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
9730E2011
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
MFG
NACCO MATERIALS HANDLING GROUP INC DBA YALE MATERIALS HANDLING DIV NACCO MATERIALS HANDLING GROUP INC.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BLEEDING FEATURE QUANTITY: 1
BODY MATERIAL: IRON, CAST
BORE DIAMETER: 1.500 INCHES NOMINAL
BORE TYPE: STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS: SINGLE ACTING SINGLE CYLINDER
FEATURES PROVIDED: BLEEDER VALVES AND RUBBER BOOT
MOUNTING FACILITY THREAD CLASS: 2B
MOUNTING FACILITY THREAD DIAMETER: 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH: 0.750 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH: 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNC
MOUNTING POSITION: ANY ACCEPTABLE
MOUNTING PROVISION: THREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: FLANGE CENTER SECTION
OVERALL HEIGHT: 3.500 INCHES NOMINAL
OVERALL WIDTH: 2.687 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
PORT STYLE: 7 INVERTED FLARE
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.437 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 24
PORT THREAD SERIES DESIGNATOR: UNS
SEAT ANGLE IN DEG: 42.0
TEMP RATING: NOT RATED
Related Searches:
9M30E2011
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
9M30E2011
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
MFG
NACCO MATERIALS HANDLING GROUP INC DBA YALE MATERIALS HANDLING DIV NACCO MATERIALS HANDLING GROUP INC.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BLEEDING FEATURE QUANTITY: 1
BODY MATERIAL: IRON, CAST
BORE DIAMETER: 1.500 INCHES NOMINAL
BORE TYPE: STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS: SINGLE ACTING SINGLE CYLINDER
FEATURES PROVIDED: BLEEDER VALVES AND RUBBER BOOT
MOUNTING FACILITY THREAD CLASS: 2B
MOUNTING FACILITY THREAD DIAMETER: 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH: 0.750 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH: 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNC
MOUNTING POSITION: ANY ACCEPTABLE
MOUNTING PROVISION: THREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: FLANGE CENTER SECTION
OVERALL HEIGHT: 3.500 INCHES NOMINAL
OVERALL WIDTH: 2.687 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
PORT STYLE: 7 INVERTED FLARE
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.437 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 24
PORT THREAD SERIES DESIGNATOR: UNS
SEAT ANGLE IN DEG: 42.0
TEMP RATING: NOT RATED
Related Searches:
A30-3261Q17
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
A30-3261Q17
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
MFG
MERITOR HEAVY VEHICLE SYSTEMS LLC
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BLEEDING FEATURE QUANTITY: 1
BODY MATERIAL: IRON, CAST
BORE DIAMETER: 1.500 INCHES NOMINAL
BORE TYPE: STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS: SINGLE ACTING SINGLE CYLINDER
FEATURES PROVIDED: BLEEDER VALVES AND RUBBER BOOT
MOUNTING FACILITY THREAD CLASS: 2B
MOUNTING FACILITY THREAD DIAMETER: 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH: 0.750 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH: 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNC
MOUNTING POSITION: ANY ACCEPTABLE
MOUNTING PROVISION: THREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: FLANGE CENTER SECTION
OVERALL HEIGHT: 3.500 INCHES NOMINAL
OVERALL WIDTH: 2.687 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
PORT STYLE: 7 INVERTED FLARE
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.437 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 24
PORT THREAD SERIES DESIGNATOR: UNS
SEAT ANGLE IN DEG: 42.0
TEMP RATING: NOT RATED
Related Searches:
A343261Q17
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
A343261Q17
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
MFG
NACCO MATERIALS HANDLING GROUP INC DBA YALE MATERIALS HANDLING DIV NACCO MATERIALS HANDLING GROUP INC.
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BLEEDING FEATURE QUANTITY: 1
BODY MATERIAL: IRON, CAST
BORE DIAMETER: 1.500 INCHES NOMINAL
BORE TYPE: STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS: SINGLE ACTING SINGLE CYLINDER
FEATURES PROVIDED: BLEEDER VALVES AND RUBBER BOOT
MOUNTING FACILITY THREAD CLASS: 2B
MOUNTING FACILITY THREAD DIAMETER: 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH: 0.750 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH: 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNC
MOUNTING POSITION: ANY ACCEPTABLE
MOUNTING PROVISION: THREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: FLANGE CENTER SECTION
OVERALL HEIGHT: 3.500 INCHES NOMINAL
OVERALL WIDTH: 2.687 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
PORT STYLE: 7 INVERTED FLARE
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.437 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 24
PORT THREAD SERIES DESIGNATOR: UNS
SEAT ANGLE IN DEG: 42.0
TEMP RATING: NOT RATED
Related Searches:
F18777
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
F18777
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
MFG
FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BLEEDING FEATURE QUANTITY: 1
BODY MATERIAL: IRON, CAST
BORE DIAMETER: 1.500 INCHES NOMINAL
BORE TYPE: STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS: SINGLE ACTING SINGLE CYLINDER
FEATURES PROVIDED: BLEEDER VALVES AND RUBBER BOOT
MOUNTING FACILITY THREAD CLASS: 2B
MOUNTING FACILITY THREAD DIAMETER: 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH: 0.750 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH: 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNC
MOUNTING POSITION: ANY ACCEPTABLE
MOUNTING PROVISION: THREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: FLANGE CENTER SECTION
OVERALL HEIGHT: 3.500 INCHES NOMINAL
OVERALL WIDTH: 2.687 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
PORT STYLE: 7 INVERTED FLARE
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.437 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 24
PORT THREAD SERIES DESIGNATOR: UNS
SEAT ANGLE IN DEG: 42.0
TEMP RATING: NOT RATED
Related Searches:
FD18777
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
FD18777
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,WHEEL
NSN, MFG P/N
2530000322638
NSN
2530-00-032-2638
MFG
FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
BLEEDING FEATURE QUANTITY: 1
BODY MATERIAL: IRON, CAST
BORE DIAMETER: 1.500 INCHES NOMINAL
BORE TYPE: STRAIGHT
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 2.125 INCHES NOMINAL
DESIGN CHARACTERISTICS: SINGLE ACTING SINGLE CYLINDER
FEATURES PROVIDED: BLEEDER VALVES AND RUBBER BOOT
MOUNTING FACILITY THREAD CLASS: 2B
MOUNTING FACILITY THREAD DIAMETER: 0.375 INCHES NOMINAL
MOUNTING FACILITY THREAD DIRECTION: RIGHT-HAND
MOUNTING FACILITY THREAD LENGTH: 0.750 INCHES NOMINAL
MOUNTING FACILITY THREAD QUANTITY PER INCH: 16
MOUNTING FACILITY THREAD SERIES DESIGNATOR: UNC
MOUNTING POSITION: ANY ACCEPTABLE
MOUNTING PROVISION: THREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: FLANGE CENTER SECTION
OVERALL HEIGHT: 3.500 INCHES NOMINAL
OVERALL WIDTH: 2.687 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CENTER SECTION
PORT STYLE: 7 INVERTED FLARE
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.437 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 24
PORT THREAD SERIES DESIGNATOR: UNS
SEAT ANGLE IN DEG: 42.0
TEMP RATING: NOT RATED
Related Searches:
35A
TORQUE ROD,TANDEM AXLE
NSN, MFG P/N
2530000324710
NSN
2530-00-032-4710
MFG
GENERAL MOTORS CORP DELCO PRODUCTS DIV MACHINE CONTROL SYSTEMS
Description
ADJUSTABILITY: NONADJUSTABLE
BALL STUD LOCATION: BOTH ENDS
DIAMETER: 0.750 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.250 INCHES NOMINAL
END TYPE: BALL STUD
SCREW THREAD SERIES DESIGNATOR: UNF
TAPER: 1.250 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.656 INCHES NOMINAL
TAPER MAJOR DIAMETER: 1.000 INCHES NOMINAL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES NOMINAL
THREAD SIZE: 3/4-16
Related Searches:
35A
TORQUE ROD,TANDEM AXLE
NSN, MFG P/N
2530000324710
NSN
2530-00-032-4710
MFG
GENERAL MOTORS CORP
Description
ADJUSTABILITY: NONADJUSTABLE
BALL STUD LOCATION: BOTH ENDS
DIAMETER: 0.750 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.250 INCHES NOMINAL
END TYPE: BALL STUD
SCREW THREAD SERIES DESIGNATOR: UNF
TAPER: 1.250 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.656 INCHES NOMINAL
TAPER MAJOR DIAMETER: 1.000 INCHES NOMINAL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES NOMINAL
THREAD SIZE: 3/4-16
Related Searches:
5304939
TORQUE ROD,TANDEM AXLE
NSN, MFG P/N
2530000324710
NSN
2530-00-032-4710
MFG
GENERAL MOTORS CORP
Description
ADJUSTABILITY: NONADJUSTABLE
BALL STUD LOCATION: BOTH ENDS
DIAMETER: 0.750 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.250 INCHES NOMINAL
END TYPE: BALL STUD
SCREW THREAD SERIES DESIGNATOR: UNF
TAPER: 1.250 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.656 INCHES NOMINAL
TAPER MAJOR DIAMETER: 1.000 INCHES NOMINAL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES NOMINAL
THREAD SIZE: 3/4-16
Related Searches:
812E1071
TORQUE ROD,TANDEM AXLE
NSN, MFG P/N
2530000324710
NSN
2530-00-032-4710
MFG
KERSEY / AMERICAN LAFRANCE A DIV OF FIGGIE INTERNATIONAL INC
Description
ADJUSTABILITY: NONADJUSTABLE
BALL STUD LOCATION: BOTH ENDS
DIAMETER: 0.750 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 0.250 INCHES NOMINAL
END TYPE: BALL STUD
SCREW THREAD SERIES DESIGNATOR: UNF
TAPER: 1.250 PER FOOT IN INCHES NOMINAL
TAPER LENGTH: 0.656 INCHES NOMINAL
TAPER MAJOR DIAMETER: 1.000 INCHES NOMINAL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES NOMINAL
THREAD SIZE: 3/4-16
Related Searches:
37-915N122
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335144
NSN
2530-00-033-5144
37-915N122
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335144
NSN
2530-00-033-5144
MFG
LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE
Description
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
Related Searches:
915N122
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335144
NSN
2530-00-033-5144
915N122
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335144
NSN
2530-00-033-5144
MFG
MORRIS MATERIAL HANDLING INC.
Description
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
Related Searches:
FD7750
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335144
NSN
2530-00-033-5144
FD7750
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335144
NSN
2530-00-033-5144
MFG
FEDERAL MOGUL CORP SUB WAGNER BRAKE MOOG AUTOMOTIVE DIV
Description
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
Related Searches:
1125
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
1125
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
BENDIX CORP THE
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
Related Searches:
13066
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
13066
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
ECHLIN INC
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
Related Searches:
174-129
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
174-129
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
DELCO MORAINE DIV OF GENERAL MOTORS CORP
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
Related Searches:
2265213
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
2265213
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
Related Searches:
2265213
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
2265213
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
GENERAL MOTORS CORP
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
Related Searches:
5473008
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
5473008
CYLINDER ASSEMBLY,HYDRAULIC BRAKE,MASTER
NSN, MFG P/N
2530000335145
NSN
2530-00-033-5145
MFG
MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02
Description
(NON-CORE DATA) FIRST PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
(NON-CORE DATA) SECOND PISTON ROD END LUBRICATION FACILITY: NOT INCLUDED
ACTUATION METHOD: DIRECT
BODY MATERIAL: ANY ACCEPTABLE
BORE DIAMETER: 1.500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS: 4.125 INCHES NOMINAL
COMPRESSED LENGTH: 9.750 INCHES NOMINAL
EXTENDED LENGTH: 11.750 INCHES NOMINAL
FEATURES PROVIDED: FILLER PLUG AND RUBBER BOOT
FIRST END EXTERNAL THREAD LENGTH: 1.156 INCHES NOMINAL
FIRST END OUTSIDE DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END STYLE: 7 EXTERNAL THREADED
FIRST PISTON ROD END THREAD CLASS: 2A
FIRST PISTON ROD END THREAD DIAMETER: 0.375 INCHES NOMINAL
FIRST PISTON ROD END THREAD DIRECTION: RIGHT-HAND
FIRST PISTON ROD END THREAD QUANTITY PER INCH: 24
FIRST PISTON ROD END THREAD SERIES DESIGNATOR: UNF
MOUNTING FACILITY DIAMETER: 0.469 INCHES NOMINAL
MOUNTING PROVISION: UNTHREADED MOUNTING HOLES
MOUNTING PROVISION ARRANGEMENT STYLE: 1 TWO HOLE
MOUNTING TYPE AND LOCATION: BOSS CENTER SECTION
OVERALL HEIGHT: 5.375 INCHES NOMINAL
OVERALL WIDTH: 2.500 INCHES NOMINAL
PORT LOCATION AND QUANTITY: 1 CYLINDER HEAD END
PORT STYLE: 5 GASKET SEAL
PORT THREAD CLASS: 2B
PORT THREAD DIAMETER: 0.500 INCHES NOMINAL
PORT THREAD QUANTITY PER INCH: 20
PORT THREAD SERIES DESIGNATOR: UNF
RESERVOIR TYPE: INTEGRAL
SEAT ANGLE IN DEG: ANY ACCEPTABLE
TEMP RATING: NOT RATED
